hit counter script

Drain Hose Connection - Bosch 9000063716 (8504) Use And Care Manual

Bosch 9000063716 (8504) dishwasher installation instructions
Table of Contents

Advertisement

Available languages

Available languages

Leg
Leveler
Locking
Screw
Figure 23
Silver
Spring
Clamp
Gold
Screw
Clamp
Figure 24
Figure 26

Drain Hose Connection

2 After the unit is installed in the enclosure, leveled and
3 Tighten screws until they are flush with the surface of
Installation of the Rubber Drain Hose
1 Obtain the Rubber Drain Hose Adaptor and the two
2 On one outside end of the Rubber Drain Hose Adapter
Screw
Boss
3 Secure the connection with the Silver Spring Clamp.
4 Use the Gold Screw Clamp to attach the Rubber Drain
Connecting the Drain Hose to the
Household Plumbing
The dishwasher drain hose may be connected to the drain
plumbing in one of four ways:
1 Directly to the undersink dishwasher drain connection,
2 Directly to a disposer dishwasher drain connection, as
3 To the undersink dishwasher drain connection through
4 To a disposer dishwasher drain connection through an
Information on installing air gaps and disposers can be
found in the Plumbing Preparation section of this
manual.
Figure 25
NOTE: If the dishwasher drain hose is to be connected to
a disposer dishwasher drain connection, remove the plug
from the disposer's dishwasher drain connection.
Use the supplied Rubber Drain Hose Adaptor and Drain
Hose Clamps to connect the dishwasher drain hose to the
plumbing drain connection. Use the spring clamp to
secure the Rubber Drain Hose Adaptor to the dishwasher
drain hose. Use the screw clamp to secure the Rubber
Drain Hose Adaptor to the plumbing drain connection.
The dishwasher drain hose must have one place along its
length that is securely attached 20 inches above the
cabinet floor.
Figure 27
secured, lock the two front leg levelers in place by
driving the enclosed leg leveler locking screws into
each screw boss located in front of the levelers. See
Figure 23.
the bosses.
Adaptor
hose clamps from the Dishwasher Installation Kit.
is a raised groove. Insert the drain hose into the end
without the raised groove. Be sure to fully insert the
drain hose.
Hose Adaptor to the house plumbing.
as shown in Figure 24.
shown in Figure 25.
an air gap, as shown in Figure 26.
air gap, as shown on Figure 27.
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

She66c02uc8504

Table of Contents

Save PDF