Page 3
(See https://www.toshiba.com/tic/industrial/uninterruptible-power-systems. ) Toshiba and SCiB are registered trademarks of the Toshiba Corporation. All other product or trade references appearing in this manual are registered trademarks of their respective owners. Toshiba International Corporation shall not be liable for direct, indirect, special, or consequential damages resulting from the use of the information contained within this manual.
Introduction This insert provides information on how to safely install the Human–Machine Interface (HMI) Option for the G9000 Series SCiB Energy Storage System (ESS). The SCiB ESS Manual (PN 98485) includes a section of general safety instruc- tions that describes the warning labels and symbols that are used throughout the manual. Read the SCiB ESS Manual completely before installing, operating, performing maintenance on the equipment, or taking any actions described in this insert.
Hardware Contents The following table shows the bill of material for the HMI Option kit. TABLE 2.1: HMI KIT BILL OF MATERIAL TIC PN Description Quantity 201334 HMI DISPLAY 7IN WDSCRN TFT 200866 BRKT HMI EXOR07_RES-TOUCH 201639 WIRE KIT MULTI HMI SCiB 201624 SCiB ESS HMI INSTALLATION MANUAL Installation Procedure...
Page 18
SOCIAL INFRASTRUCTURE SYSTEMS GROUP POWER ELECTRONICS DIVISION 13131 West Little York Road, Houston, Texas 77041-9990 Tel (713) 466-0277 Fax. (713) 466-8773 US (855) 803-7087 Canada (800) 872-2192 https://www.toshiba.com/tic/industrial/uninterruptible-power-systems Printed in the U.S.A.