Table of Contents
Advertisement
DVD Menu Options
0
Brightness
0
Contrast
0
Tint
0
Color
Close
Press / to highlight one of the following options.
D
Brightness
Increase the value to brighten the picture or vice
versa. Choose zero (0) for average setting.
Contrast
Increase the value to sharpen the picture or vice
versa. Choose zero (0) to balance the contrast.
Tint
Increase the value to darken the picture or vice
versa. Choose zero (0) for average setting.
Color
Increase the value to enhance the colour in your
picture or vice versa. Choose zero (0) to balance the
colour.
Press / to adjust the setting that best suits
E
your personal preference.
Repeat steps D~
to adjust your picture
F
E
preference.
Press / to select ＇Close＇ and press OK to
G
confirm.
HD Resolution
The video output of the DVD player can be selected
as "Auto", "480p/576p", "720p", "1080i" or "1080p".
In ' Video ', press / to select { HD Resolution },
A
then press .
Use / to select a setting and press OK to
B
confirm.
Tip:
If the Video Output mode is not set to"HDMI", you
cannot select the "HD Resolution".
JPEG Interval
You can continuously playback all JPEG files
automatically. Set "JPEG Interval" to "5 Seconds", "
10 Seconds" or "15 Seconds".
In ' Video ', press / to select { JPEG Interval },
A
then press .
{ Off }
Plays back one file at a time.
{ 5 Seconds }
Plays back images in the form of a slide show at 5
seconds intervals.
{ 10 Seconds }
Plays back images in the form of a slide show at 10
seconds intervals
{ 15 Seconds }
Plays back images in the form of a slide show at 15
seconds intervals
Use / to select a setting and press OK to
B
confirm.
Helpful hint: Press to go back to previous menu item.
Press SETUP to exit the menu item.
Using the Audio setup menu
Press SETUP on the remote control.
A
The system setup menu appears.
Digital Output
Language
Night Mode
Video
Down Sampling
3D Effects
Audio
Rating
Misc
Press / to select { Audio }, then press .
B
Press / to select an item, then press to
C
access.
Example: { Night Mode }
The options for the selected item appears.
If the selection in the menu is greyed out, that
means the feature is not available or not possible to
change at the current state.
Use / to select a setting and press OK to
D
confirm.
Example: { On }
The setting is selected and setup is completed.
To exit, press SETUP.
E
Digital Output
Select this if you connect to a multichannel decoder/
receiver.
In 'Audio', press / to select { Digital Output },
A
then press .
{ All }
Select this if the connected device has a built-in
multichannel decoder that supports one of the
multichannel audio format (Dolby Digital, DTS).
{ PCM }
Select this if the connected device is not capable of
decoding multichannel audio. The DVD player will
convert the Dolby Digital signal to PCM (Pulse Code
Modulation).
{ Off }
To deactivate the digital audio output. For example, if
you use the AUDIO OUT jacks to connect to a TV or
stereo system.
Use / to select a setting and press OK to
B
confirm.
Tip:
-When playing MPEG, MP3 and set Digital Output to
{All}, the player will output PCM signals.
Night Mode
This mode optimizes playback of sound at low
volume. High volume outputs will be softened and
low volume outputs are brought upward to an audible
level.
In ＇ Audio＇, press / to select { Night Mode },
A
then press .
{ On }
Select this to set low volume output. This feature
is only available for movie discs with Dolby Digital
mode.
:
PCM
:
Off
:
On
:
Off
Hide quick links:
Advertisement
Table of Contents
