Table of Contents
Advertisement
SERVICE MANUAL
1
2
3
4
5
6
7
8
9
0
Refer to the SERVICE MANUAL of VHS MECHANICAL
ADJUSTMENT
for MECHANICAL ADJUSTMENTS.
(9-921-748-11)
System
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
Double azimuth four heads
Video signal
NTSC color, EIA standards
Tape speed
SP: 33.35 mm/s
EP: 11.11 mm/s
LP: 16.67 mm/s,
playback only
Maximum recording/playback time
9 hrs. in EP mode (with T-180 tape)
Fast-forward and rewind time
Approx. 3 min. (with T-120 tape)
Tuner section
Channel coverage
VHF 2 to 13
UHF 14 to 69
CATV A-8 to A-1, A to W, W+1 to W+84
Antenna
75-ohm antenna terminal for VHF/UHF
Input and outputs
LINE-1 IN and -2 IN
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (1 each) (SLV-LX50
and LX40), (2 each) (SLV-LX70S and LX60S)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LX40/LX50/LX60S/LX70S
SLV-LX70S
HiFi model : SLV-LX60S/LX70S
Mono model: SLV-LX40/LX50
SPECIFICATIONS
LINE OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced,
sync negative
AUDIO OUT, phono jacks (1 each) (SLV-LX50
and LX40), (2 each) (SLV-LX70S and LX60S)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs (max.)
Power back-up
Built-in self-charging capacitor
Back-up duration: up to 8 hours at a time
General
Power requirements
110 V AC to 240 V AC, 50/60 Hz
(SLV-LX70S (CL/CS) and LX50 (CL/CS))
120 V AC, 60 Hz
(SLV-LX70S (MX/PA/PC/VZ), LX60S (MX),
LX50 (MX/PA/PC/VZ), and LX40 (MX))
Power consumption
17 W
(SLV-LX70S (CL/CS/MX/PA/PC/VZ) and
SLV-LX60S (MX))
— 1 —
RMT-V293A/V294A
Chilean Model
SLV-LX50CL/LX50CS/LX70SCL/
Mexican Model
SLV-LX40MX/LX50MX/LX60SMX/
Panama Model
Venezuelan Model
SLV-LX50PA/LX50PC/LX50VZ/
LX70SPA/LX70SPC/LX70SVZ
16 W
(SLV-LX50 (CL/CS/MX/PA/PC/VZ) and
SLV-LX40 (MX))
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Dimensions
Approx. 355 x 96 x 288.8 mm (w/h/d)
including projecting parts and controls
Mass
Approx. 3.6 kg
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Audio/video cable (1) (3-phono to 3-phono)
(SLV-LX70S and LX60S only)
Plug adaptor (1)
(SLV-LX70S (CL/CS) and LX50 (CL/CS) only)
Design and specifications are subject to change
without notice
ENERGY STAR
As an ENERGY STAR
has determined that this product meets the
ENERGY STAR
VIDEO CASSETTE RECORDER
LX70SCS
LX70SMX
S MECHANISM
®
is a U.S. registered mark.
®
Partner, Sony Corporation
®
Advertisement
Table of Contents
Related Manuals for Sony LX40
Summary of Contents for Sony LX40
- Page 1 VIDEO IN, phono jack (1 each) Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative AUDIO IN, phono jacks (1 each) (SLV-LX50 and LX40), (2 each) (SLV-LX70S and LX60S) Input level: 327 mVrms Input impedance: more than 47 kilohms LX40/LX50/LX60S/LX70S...
- Page 2 COMPONENTS IDENTIFIED BY MARK ! OR DOTTED LINE WITH MARK ! ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
-
Page 3: Table Of Contents
Section Title SERVICE NOTE ERROR CODE INDICATION ... 5 GENERAL Getting Started ... 1-1 Step 2 : Setting up the remote commander ... 1-1 Step 3 : Hookups ... 1-1 Selecting a language ... 1-4 Setting the clock ... 1-4 Presetting channels ... -
Page 4: Service Note
1. ERROR CODE INDICATION • Error codes are indicated using the lower 5 digits in the fluorescent display tube. “At this time, Colon “:” between character is not indicated.” Mode code indication when the error has occurred. Error code ERROR CODE 0 No error 1 Cam encoder error Loading direction 2 Cam encoder error Unloading direction... -
Page 5: General
Now you can use the ?/1, VOL +/–, CH +/–, and TV/VIDEO buttons to control your TV. You can also use the buttons marked with a dot (•) to control a Sony TV. To control the VCR, reset •TV / VIDEO to VIDEO. - Page 6 For SLV-LX50 and LX40 A Use this hookup if your TV has stereo jacks AUDIO VIDEO LINE-1 IN LINE OUT VIDEO AUDIO Audio/video cable (not supplied) B Use this hookup if your TV doesn’t have stereo jacks AUDIO VIDEO LINE-1 IN...
- Page 7 VCR. “ACS” (Auto Clock Set) will flash in the display window and search for a AJUSTE RELOJ time signal provided by Sony Entertainment Television (SETV). After that, AUTO whenever you turn off the VCR, it checks the time and adjusts the clock, even for MANUAL Daylight Saving Time.
-
Page 8: Selecting A Language
VCR. “ACS” (Auto Clock Set) will flash in the display window and search for a time signal provided by Sony Entertainment Television (SETV). After that, whenever you turn off the VCR, it checks the time and adjusts the clock, even for Daylight Saving Time. - Page 9 If the clock does not activate Follow steps 1 to 4 in “Using the Auto Clock Set feature.” TOTAL. AUTO. The TOTAL. AUTO. menu is displayed. CH AJUSTE RELOJ HORARIO VERANO VOLVER SELECCIONAR AJUSTAR PARA SALIR Using Manual Clock Set Before you start…...
-
Page 10: Presetting Channels
Presetting channels This VCR is capable of receiving VHF channels 2 to 13, UHF channels 14 to 69 and unscrambled CATV channels 1 to 125. First, we recommend that you preset the receivable channels in your area using automatic presetting methods. Then, if there are any unwanted channels, disable them manually. -
Page 11: Basic Operations
Press M/m to highlight PREAJUSTE DEL SINTONIZADOR, then press OK. PLAY ANTENA / CABLE AJUSTE AUTO. MANUAL SINTONIA FINA SELECCIONAR AJUSTAR PARA SALIR • To preset a channel: Press the number buttons to enter the channel number, then press ENTER. Press OK. -
Page 12: Recording Tv Programs
Turning on the VCR and TV, and starting playback automatically (Trinitron TV Synchro Play) You can only use this function if your TV is made by Sony (Trinitron TV). How to connect to use this function Connect the VCR and TV with the audio/video cable (see “Audio/video (A/V) hookup”... -
Page 13: Recording Tv Programs Using The Dial Timer
To watch another TV program while recording Press TV/VIDEO to turn off the VIDEO indicator in the display window. If the TV is connected to the VCR’s LINE OUT jacks, set the TV to the TV’s antenna input; if not, skip this step. Select another channel on the TV. -
Page 14: Recording Tv Programs Using The Timer
To use the VCR after setting the timer To use the VCR before a timer recording begins, just press ?/1. The disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: •... -
Page 15: Additional Operations
To use the VCR after setting the timer To use the VCR before timer recording begins, just press ?/1. The disappears from the display window and the VCR switches on. Remember to press ?/1 to reset the VCR to the timer recording standby mode after using the VCR. You can also do the following tasks while the VCR is recording: •... -
Page 16: Setting The Recording Duration Time
Setting the recording duration time After you have started recording, you can have the VCR stop recording automatically after a specified duration. While recording, press z REC. indicator appears in the display window. Press z REC repeatedly to set the duration time. Each press advances the time in increments of 30 minutes. -
Page 17: Searching Using The Index Function
How sound is recorded on a video tape The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the main track along with the picture. Monaural sound is recorded onto the normal audio track along the edge of the tape. Monaural sound Normal audio track Hi-fi audio track... -
Page 18: Skip-Searching Automatically (Quick View)
Searching using the index function The VCR marks the tape with an index signal at the point where each recording begins. Use these signals as references to find a specific recording. The VCR can search up to 9 index signals ahead of or behind the current position. -
Page 19: Adjusting The Picture
To cancel searching Press H PLAY or x STOP. To turn off the bar indication Press DISPLAY again. Notes • The figure on the bar indication represents the total time length of the inserted tape as shown below. The total time length may not be displayed correctly for: –... -
Page 20: Editing With Another Vcr
Editing with another VCR How to connect to record on this VCR SLV-LX70S and LX60S This VCR (Recorder) LINE-2 IN : Signal flow SLV-LX50 and LX40 This VCR (Recorder) LINE-2 IN Audio/video cable (not supplied) : Signal flow Editing with another VCR... -
Page 21: Additional Information
Be sure to use the Sony T-25CLD or T-25CLDR video head cleaning cassette. If these cleaning cassettes are not available in your area, have the heads cleaned at your nearest Sony service facility (a standard service charge will be required). - Page 22 SLV-LX50 and LX40 A ?/1 POWER switch (44) I x STOP button (33) (66) B Z EJECT button (33) J X PAUSE button (33) (66) C Tape compartment K DIAL TIMER (38) (54) (55) (56) D Remote sensor (5) L SEARCH MODE button (54) (55) (56) E m REW (rewind) button (33) (47) M CHANNEL/TRACKING +/–...
- Page 23 K ?/1 (power) switch (6) (44) L TV/VIDEO button (6) (37) M AUDIO MONITOR button (52) (SLV-LX70S and LX60S only) N TIMER button (43) (50) O Number buttons (31) P ENTER button (31) Q CH (channel) +/– buttons (6) (36) R CLEAR button (33) (51) S y SLOW button (47) T ×2 button (47)
-
Page 24: Disassembly
SLV-LX40/LX50/LX60S/LX70S SECTION 2 DISASSEMBLY NOTE: Follow the disassembly procedure in the numerical order given. 2-1. CASE, FRONT PANEL BLOCK ASSEMBLY 1 Two tapping screws 3 Upper case 4 Flat Cable FFJ-4 2 Two tapping screws Hooks 5 Flat Cable FDM-10... -
Page 25: Rear Panel
2-3. REAR PANEL 2 Rear panel (Engaged by the seven hooks) Hooks Hooks Hooks Hooks 1 POWER code stopper 2-4. MA-405 BOARD 1 Six screws (Sumitite (B3) +BV) 2 MA-405 board with mechanism deck... - Page 26 2-5. MECHANSIM DECK 4 Flat cable FMD-21 3 Flat cableFAC-9 5 Harness FE-127 6 Two screws (BVTP 3 x 12) 9 Screw 2 Screw (BVTP 3 x 12) (Sumitite (B3), +BV) qs Mechanism deck 1 Flexible cable (CN260) (CN101) (CN351) (CN350) (CN600) qa MA-405 board...
-
Page 27: Internal Views
2-6. INTERNAL VIEWS — Top View — M901 Drum Assembly DZH-0A0A/Z-RP (LX60S/LX70S) DZH-0A2A/Z-RP (LX40/LX50) FE head 1-500-477-11 Reel (S) table 3-977-507-01 — Bottom View — 8-839-047-53 ACE head block assembly 8-839-049-53 A-6759-620-A FL complete assembly A-6759-619-B M902 DC motor (capstan) -
Page 28: Circuit Boards Location
2-7. CIRCUIT BOARDS LOCATION MA-405 VIDEO, AUDIO, SERVO/SYSTEM CONTROL, (POWER, EJECT SWITCH) TUNER, POWER SUPPLY FJ-32 (LINE 2 IN) DI-80 (DIAL TIMER) 2-5E... -
Page 29: Block Diagrams
SLV-LX40/LX50/LX60S/LX70S SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM... -
Page 30: Video Block Diagram
SLV-LX40/LX50/LX60S/LX70S 3-2. VIDEO BLOCK DIAGRAM... -
Page 31: Servo/System Control Block Diagram
SLV-LX40/LX50/LX60S/LX70S 3-3. SERVO/SYSTEM CONTROL BLOCK DIAGRAM... -
Page 32: Tuner Block Diagram
SLV-LX40/LX50/LX60S/LX70S 3-4. TUNER BLOCK DIAGRAM LX40/LX50... -
Page 33: Audio Block Diagram
SLV-LX40/LX50/LX60S/LX70S 3-5. AUDIO BLOCK DIAGRAM 3-10... -
Page 34: Power Block Diagram
SLV-LX40/LX50/LX60S/LX70S 3-6. POWER BLOCK DIAGRAM 3-11 3-12E... -
Page 35: Printed Wiring Boards And Schematic Diagrams
! or dotted line with mark une marque ! sont critiques ! are critical for safety. pour la sécurité. Replace only with part number Ne les remplacer que par une specified. pièce portant le numéro spécifié. SECTION 4 Diode L452 10UH 2520 SLV-LX40/LX50/LX60S/LX70S... -
Page 36: Frame Schematic Diagram
SLV-LX40/LX50/LX60S/LX70S 4-1. FRAME SCHEMATIC DIAGRAM FRAME SCHEMATIC DIAGRAM... - Page 37 SLV-LX40/LX50/LX60S/LX70S MA-405 (VIDEO, AUDIO, SERVO/SYSTEM CONTROL, TUNER, POWER) PRINTED WIRING BOARD — Ref. No. MA-405 Board:1,000 Series — MA-405 BOARD MA-405 BOARD (SIDE B) D101 IC260 D102 IC301 D103 IC350 D161 IC403 D162 IC404 D163 IC570 D189 IC600 D301 IC601...
- Page 38 0.1u R0.2/P0.5 SW30 C271 R1.6/P2.0 R2.0/P4.2 0.01u C267 0.1u IC260 LA70011 AN_GND (POWER, EJECT SWITCH) FJ-32 (LINE 2 IN) SLV-LX40/LX50/LX60S/LX70S JL271 HF ADJ JL272 PB RF C285 JL273 RF SWP 0.01u JL274 AN_GND JL277 REC CURR ADJ JL278 REC H R273 0.60mm...
- Page 39 SLV-LX40/LX50/LX60S/LX70S MA-405 (Y/C, AUDIO PROCESSOR) SCHEMATIC DIAGRAM – Ref. No: MA-405 board; 1000 series – • See page 4-5 for printed wiring board. • See page 4-21 for waveforms. MA-405 BOARD(2/7) XX MARK:NO MOUNT R :REC MODE NO MARK:REC/PB MODE...
- Page 40 S CLK0 MA-405 (6/7) (SEE PAGE 4-17) S OUT0 FLD CS MS10 KKP + MS11 KKP - MS12 C176 0.1u LX40/LX50 AF REC P JS521 AF SWP I2C DATA MA-405 (4/7) I2C CLK R161 (SEE PAGE 4-13) AF ENV R162 1500...
- Page 41 SLV-LX40/LX50/LX60S/LX70S MA-405 (AUDIO PROCESS) SCHEMATIC DIAGRAM – Ref. No: MA-405 board; 1000 series – • See page 4-5 for printed wiring board. MA-405 BOARD(4/7) AUDIO PROCESS (AU BLOCK) XX MARK:NO MOUNT NO MARK:REC/PB MODE R :REC MODE P :PB MODE...
- Page 42 TUNER (TU BLOCK) XX MARK:NO MOUNT R704 C701 R703 JL715 1/4W JL717 VS15 RF V OUT TU VIDEO IN C796 10µ MA-405 (2/7) LX40/LX50 (SEE PAGE 4-9) TU AUDIO MONO C709 100u C797 RFCH 0.033u C705 S701 R712 2.2uH 2.2uH L703...
- Page 43 SLV-LX40/LX50/LX60S/LX70S MA-405 (DISPLAY CONTROL) SCHEMATIC DIAGRAM – Ref. No: MA-405 board; 1000 series – • See page 4-5 for printed wiring board. MA-405 BOARD(6/7) DISPLAY CONTROL (FRONT BLOCK) XX MARK:NO MOUNT AN_GND AN_GND AN_GND L2(R) AU_GND MA-405 (2/7) AU_GND AU_GND...
- Page 44 R607 2200p R651 8200 800V D625 1/4W MTZJ-T-77-18B C607 560p R648 2200 PH600 R615 PC123FY2 2200 IC601 HA17431PA-TZ IC601 SLV-LX40/LX50/LX60S/LX70S L660 68uH 13.5 13.5 JS606 Q600 2SB1398-Q(TA).S0 MTR 12V REG R621 C671 12.8 1/4W ET601 TERMINAL R622 GROUND C661 0.01u...
- Page 45 SLV-LX40/LX50/LX60S/LX70S MA-405 MA-405 BOARD (1/7) (R/P BLOCK) (VA BLOCK) IC201 2 REC IC260 4 REC/PB 3.6Vp-p IC260 5 REC/PB IC201 7 REC 0.1µsec/div 3.5Vp-p 0.1V/div IC260 7 PB IC201 wd PB 0.6Vp-p IC201 wk REC/PB IC260 9 REC 0.1µsec/div 170mVp-p...
-
Page 46: Printed Wiring Boards And Schematic Diagrams
EJECT POWER D GND MA-405 (POWER, EJECT SWITCH) FJ-32 (LINE 2 IN) DI-80 (DIAL TIMER) There are few cases that the part printed on this diagram isn’t mounted in this model. LX40/LX50 JL801 JS801 JL802 JL803 JL804 JL805 D801 D802 HZM6.8ZWA1TL... -
Page 47: Video, Audio, Servo/System Control, Tuner, Power)
DI-80 (DIAL TIMER) PRINTED WIRING BOARD AND SCHEMATIC DIAGRAM — Ref. No. DI-80 Board:1,000 Series — DI-80 BOARD DI-80 BOARD DIAL TIMER •REF.NO.: 1,000 SERIES- MA-405 BOARD(6/7) CN403 (SEE PAGE 4-17) (POWER, EJECT SWITCH) FJ-32 (LINE 2 IN) DIAL TIMER DI-80 There are few cases that the part printed on this diagram isn’t mounted in this model. -
Page 48: Interface, Ic Pin Function Description
*6. DC voltage 1 – 5V. *7. Hi-Z (2.5V) SECTION 5 CASSETTE CASSETTE TAPE TAPE LOARDING UNLOARDING THREADING UNTEREADING — — — — — — — — — — — — — — — — TAPE TAPE THREADING UNTEREADING SLV-LX40/LX50/LX60S/LX70S STOP... -
Page 49: System Control - System Control Peripheral Circuit Interface (Ma-405 Board Ic160)
5-3. SYSTEM CONTROL — SYSTEM CONTROL PERIPHERAL CIRCUIT INTERFACE (MA-405 BOARD IC160) Signal Pin No. MA-405 Board RESET IC160 ef MA-405 Board I2C DATA 1 IC160 es MA-405 Board I2C CLOCK 1 IC160 ea MA-405 Board I2C DATA VIDEO IC160 us MA-405 Board I2C CLOCK VIDEO IC160 ua... -
Page 50: Servo/System Control Microprocessor Pin Functions (Ma-405 Board Ic160)
5-7. SERVO/SYSTEM CONTROL MICROPROCESSOR PIN FUNCTIONS (MA-405 BOARD IC160) Pin No. Pin Name DEST MPX MODE TU AFT FUNC KEY2 FUNC KEY1 S SENS T SENS V RF ENV AF ANV CBC ON KKP+ KKP– REMOCON C ROT HA SWP ENV SW RF SWP AF SWP... - Page 51 Pin No. Pin Name WHITE LEVEL OSD V OUT OSD Vcc V HOLD C VIDEO IN C SYNC PLL CLK PLL DATA PLL ENABLE TA MUTE A MUTE P CONT M12 P CONT SW12 FLD CS V-SET CS S OUT0 S IN 0 S CLK 0 I2C CLK...
-
Page 52: Adjustments
VIDEO LINE IN Pattern generator VIDEO LINE OUT Video output (75Ω) Fig. 6-2-1 SLV-LX40/LX50/LX60S/LX70S SECTION 6 ADJUSTMENTS 2-1-3. Set-up of Adjustment In this adjustment, NTSC pattern generator is connected with LINE input terminal. When check to tuner, connected AERIAL terminal. -
Page 53: Input/Output Levels And Impedance
2-1-5. Input/Output Levels and Impedance Video input: LINE IN Input signal: 1 Vp-p, 75 ohms, unbalanced, sync negative Video output: LINE OUT Output signal: 1 Vp-p, 75 ohms, unbalanced, sync negative Audio input: LINE IN Input level: –7.5 dBs (0 dBs= 0.775 Vrms) Input impedance: more than 47 kilohms Audio output:LINE OUT Standard level: –7.5 dBs at load impedance 47... -
Page 54: Servo System Check
2-3. SERVO SYSTEM CHECK 2-3-1. RF Switching Position Adjustment (MA-405 Board) [Adjustment Purpose] To adjust the link of the A-ch and B-ch of the tape playback outputs. To make the unit compatible with other tapes and units. If this specification is not satisfied, the link will appear on the screen and the screen will be disrupted, etc. -
Page 55: Hifi Switching Position Adjustment (Ma-405 Board)
2-4-2. HiFi Switching Position Adjustment (MA-405 Board) [Adjustment Purpose] To adjust the link of the A-ch and B-ch of the tape playback outputs. To make the unit compatible with other tapes and units. If this specification is not satisfied, the link will appear on the screen and the screen will be disrupted, etc. -
Page 56: Adjusting Parts Location Diagram
2-5. ADJUSTING PARTS LOCATION DIAGRAM MA-405 BOARD (CONDUCTOR SIDE) CNJ562 CN270 VIDEO/AUDIO LINE RF/HF SWP IN/OUT C671 +30 V Q600 MTR12 V -11V +12V Q662 D420 SW5V JS401 IC660 ND420 6-5E... -
Page 57: Repair Parts List
7-1-1. FRONT PANEL AND UPPER CASE SECTION Ref. No. Part No. Description X-3951-118-1 PANEL ASSY, FRONT (LX40) X-3951-120-1 PANEL ASSY, FRONT (LX50) X-3951-119-1 PANEL ASSY, FRONT (LX60S) X-3951-121-1 PANEL ASSY, FRONT (LX70S) 3-951-089-01 SPRING (GE), FL (LX40/LX50) 3-951-089-01 SPRING (GE), FL (LX60S/LX70S) 3-058-039-11 DOOR,CASSETTE 4-921-277-41 SCREW(B2.6 ×... -
Page 58: Chassis Section
Remarks Ref. No. Part No. * 53 A-6713-829-A MA-405 COMPLETE PC BOARD 3-970-608-21 SUMITITE (B3), +BV 1-791-857-11 CABLE, FLAT (FMD-21) X-3950-107-1 PANEL ASSY, REAR 7-685-648-79 SCREW + BVTP 3 x 12 TYPE2 IT-3 not supplied Description Remarks (LX40/LX50:MX,PA,PC,VZ) -
Page 59: Mechanism Deck Section-1
7-1-3. MECHANISM DECK SECTION-1 Ref. No. Part No. Description 3-977-509-01 WASHER, THRUST 3-977-507-01 TABLE, REEL (S) (GRAY) 3-977-508-01 TABLE, REEL (T) (BLACK) 1-500-144-11 HEAD, FE 3-977-495-01 SHAFT, TG2 3-977-494-01 HOLDER, FEH A-6759-619-B FL COMPLETE ASSY BOARD, COMPLETE 3-977-535-01 PLATE, LUMINOUS (END SENSOR) 3-977-536-01 PLATE, LUMINOUS (TOP SENSOR) 3-977-443-01 WASHER, STOPPER A-6759-863-B PRESS BLOCK ASSY, PINCH... -
Page 60: Mechanism Deck Section-2
3-977-501-01 PLATE, LUMINOUS A-6746-074-G ROLLER BLOCK ASSY, HC X-3947-255-1 ROLLER ASSY, HC 3-975-724-07 ARM, HC 8-839-047-53 DRUM ASSY, DZH-0A0A/Z-RP (LX60S/LX70S) 8-839-049-53 DRUM ASSY, DZH-0A2A/Z-RP 7-685-646-79 SCREW + BCTP 3 x 8 TYPE IT-3 7-682-647-09 SCREW + P3 x 6 Description Remarks (LX40/LX50) -
Page 61: Mechanism Deck Section-3
7-1-5. MECHANISM DECK SECTION-3 M903 Ref. No. Part No. Description 3-977-437-01 RETAINER,CAM MOTOR X-3947-584-1 ASSY, REEL DIRECT 3-977-443-01 WASHER, STOPPER 3-977-438-01 WORM - WHEEL 3-977-506-01 ARM, LIMITTER SELECTION 3-977-444-01 GEAR, PINCH TRANSMISSION 3-977-515-01 GUIDE, FL SLIDER 3-977-517-01 PLATE, SLIDE, FL 3-977-519-01 SPRING, TENS. -
Page 62: Electrical Parts List
1-163-009-11 CERAMIC CHIP (LX60S/LX70S ONLY) C806 1-163-009-11 CERAMIC CHIP <CONNECTOR> CN801 1-568-852-11 CONNECTOR, FFC/FPC 9P <JACK> CNJ801 1-785-622-11 JACK, PIN 2P (LX40/LX50) CNJ801 1-770-021-11 JACK, PIN 3P (LX60S/LX70S) <DIODE> D801 8-719-071-15 DIODE HZM6.8ZWA1TL D802 8-719-071-15 DIODE HZM6.8ZWA1TL D803 8-719-422-37 DIODE MA8051-TX D804 8-719-071-15 DIODE HZM6.8ZWA1TL... - Page 63 C188 1-109-982-11 CERAMIC CHIP C190 1-124-589-11 ELECT C201 1-163-809-11 CERAMIC CHIP C202 1-164-232-11 CERAMIC CHIP C203 1-163-275-11 CERAMIC CHIP (LX40/LX50) C204 1-109-982-11 CERAMIC CHIP C205 1-164-232-11 CERAMIC CHIP C206 1-164-004-11 CERAMIC CHIP C207 1-163-241-11 CERAMIC CHIP C208 1-164-232-11 CERAMIC CHIP...
- Page 64 1-126-157-11 ELECT C343 1-164-489-11 CERAMIC CHIP C345 1-164-232-11 CERAMIC CHIP C350 1-126-160-11 ELECT C351 1-104-664-11 ELECT C352 1-163-038-00 CERAMIC CHIP C353 1-126-160-11 ELECT (LX40/LX50) C354 1-126-157-11 ELECT C355 1-126-160-11 ELECT (LX40/LX50) C356 1-124-242-00 ELECT C357 1-126-163-11 ELECT C358 1-126-160-11 ELECT C359...
- Page 65 1-766-978-31 CONNECTOR, FFC/FPC 5P CN402 1-784-484-11 CONNECTOR, FFC/FPC 5P ! CN600 * 1-580-230-11 PIN, CONNECTOR (PC BOARD) 2P <JACK> CNJ562 1-793-001-21 JACK, PIN (6P) (LX60S/LX70S) CNJ562 1-779-010-11 JACK, PIN 4P (LX40/LX50) <DIODE> D103 8-719-048-26 DIODE GL528V1 D109 8-719-200-82 DIODE MPG06D-6052PKG3...
- Page 66 1-517-925-11 TUBE, FLUORESCENT INDICATOR ! PH101 8-749-015-86 PHOTO INTERRUPTER GP3S120S ! PH102 8-749-015-86 PHOTO INTERRUPTER GP3S120S ! PH600 8-749-010-64 PHOTO COUPLER PC123FY2 ! PS101 1-532-727-11 LINK, IC 0.25A/150V 0 (LX40/LX50) ! PS662 1-533-710-11 FUSE (SMD) 7-10 MA-405 Description Remarks 0 (LX40/LX50) 0 (LX40/LX50) 0 (LX40/LX50) <COIL>...
- Page 67 (LX60S/LX70S) Q301 8-729-216-21 TRANSISTOR 2SA1162Y-TE85L Q302 8-729-230-49 TRANSISTOR 2SC2712Y-TE85L Q303 8-729-230-49 TRANSISTOR 2SC2712Y-TE85L Q350 8-729-281-53 TRANSISTOR 2SC1815GR-TPE2 Q351 8-729-230-49 TRANSISTOR 2SC2712Y-TE85L (LX40/LX50) Q380 8-729-821-15 TRANSISTOR 2SD1620-TD Q500 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX Q502 8-729-216-21 TRANSISTOR 2SA1162Y-TE85L Q561 8-729-216-22 TRANSISTOR 2SB709A-QRS-TX Q600 8-729-047-92 TRANSISTOR 2SB1398-Q(TA).S0...
- Page 68 R318 1-249-437-11 CARBON R319 1-216-089-00 RES-CHIP R321 1-216-061-00 RES-CHIP R323 1-216-295-00 SHORT R350 1-216-093-91 RES-CHIP R351 1-216-067-00 RES-CHIP R352 1-249-439-11 CARBON (LX40/LX50) R353 1-216-067-00 RES-CHIP (LX40/LX50) R354 1-216-129-00 RES-CHIP R355 1-249-439-11 CARBON (LX40/LX50) R356 1-216-067-00 RES-CHIP (LX40/LX50) R357 1-216-071-00 RES-CHIP...
- Page 69 1-431-097-11 TRANSFORMER, BIAS OSCILLATION ! T600 1-435-790-11 TRANSFORMER, CONVERTER <TUNER> TU701 1-693-532-21 TUNER (BTF-3MA413) <VARISTOR> ! VDR600 1-801-267-31 VARISTOR TNR10V431K660 (LX50:CL,CS/LX70S:CL,CS) ! VDR600 1-804-048-31 VARISTOR (240NS10D) (LX40/LX50:MX,PA,PC,VZ/ LX60S/LX70S:MX,PA,PC,VZ) <VIBRATOR> X160 1-767-857-11 VIBRATOR, CRYSTAL X161 1-579-463-11 VIBRATOR, CRYSTAL X201 1-577-380-11 VIBRATOR, CRYSTAL Note :...
- Page 70 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 7-14...
- Page 71 SLV-LX40/LX50/LX60S/LX70S Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 20001B0800-1 Sony Corporation 2001. 2 NETWORK ENTERTAINMENT GROUP 9-921-786-11 Published by Quality Assurance Dept. – 86 – 7-15...