Storing Fm Stations Automatically; Autobetical; Presetting Radio Stations - Sony HT-DDW670 Operating Instructions (HT-DDW670) Operating Instructions Manual
Home theater system
Hide thumbs
Also See for HT-DDW670 Operating Instructions (HT-DDW670):
- Operating instructions manual (84 pages) ,
- Specifications (2 pages) ,
- Speakers connection (2 pages)
Table of Contents
Advertisement
Storing FM stations
automatically
— AUTOBETICAL
(Models of area code CEL, CEK only)
This function lets you store up to 30 FM and FM
RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see "Presetting radio stations" (page 20).
Use the buttons on the receiver for the operation.
1
Press ?/1 to turn off the receiver.
2
Hold down MEMORY and press ?/1 to
turn the receiver back on.
"AUTO-BETICAL SELECT" appears in
the display and the receiver scans and stores
all the FM and FM RDS stations in the
broadcast area.
For RDS stations, the tuner first checks for
stations broadcasting the same program,
then stores only the one with the clearest
signal. The selected RDS stations are sorted
alphabetically by their Program Service
name, then assigned a 2-character preset
code. For more details on RDS, see
page 21.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS station.
When done, "FINISH" appears in the
display momentarily and the receiver
returns to the normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
• If you move to another area, repeat this procedure to
store stations in your new area.
• For details on tuning the stored stations, see "Tuning
to preset stations" (page 21).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
20
GB
Presetting radio stations
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
Presetting radio stations
1
Press FM or AM to select the FM or AM
band.
The last received station is tuned in.
2
Tune in the station that you want to
preset using Automatic Tuning
(page 19) or Direct Tuning (page 19).
3
Press MEMORY.
"MEMORY" appears in the display for a
few seconds. Do steps 4 to 5 before the
display goes out.
4
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select a preset
station number.
Each time you press the button, you can
select the preset station number as follows:
tA1yA2y...yA0yB1yB2y...yB0T
tC0y...yC2yC1T
If "MEMORY" goes out before you select
the preset station number, start again from
step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
Press MEMORY again.
The station is stored to the selected preset
number.
If "MEMORY" goes out before you press
MEMORY, start again from step 3.
6
Repeat steps 2 to 5 to preset another
station.
Advertisement
Table of Contents
