CONTENTS 1. Safety warnings 1.1 Warning 1.2 Meanings of safety warning symbols 1.3 Electricity related warnings 1.4 Warnings for using 1.5 Warnings for placement 1.6 Warnings for energy 1.7 Warnings for disposal 2. Proper use of the refrigerator 2.1 Placement 2.2 Door handle installation 2.3 Levelling feet 2.4 Door right-left change...
1. Safety warnings READ SAFETY PRECAUTIONS BEFORE INSTALLATION To prevent injury to the user or other people and property damage, the following instructions must be followed. Incorrect operation due to ignoring of instructions may cause harm or damage. • WARNING: Risk of fire disaster and explosion The refrigerant of the appliance is flammable, please be care not to damange the cooling pipes during installation and transportation.if gas leakage happens, please contact the distributor or local service...
Page 4
• WARNING: Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. • WARNING: Do not damage the refrigerant circuit. • WARNING: Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
Page 5
• For EN standard: This appliance can be used by children aged from 8 years and above and persons with reduce physical sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.
1.2 Meaning of safety warning symbols This is a prohibition symbol. Any incompliance with instructions marked with this symbol may result in damage to the product or endanger the personal safety of the user. Prohibition symbol This is a warning symbol. It is required to operate in strict observance of instructions marked with this symbol;...
• Please ensure that the grounding electrode of the power socket is equipped with a reliable grounding line. • Please ask for help from persons with professional qualification to examine whether the socket is with reliable grounding line or not. • It is the end-consumers' responsibility to change the ungrounded socket into grounded socket.
• Do not pick foods or containers with wet hands in the freezing chamber when the refrigerator is running, especially metal containers in order to avoid frostbite. • Do not allow any child to get into or climb the refrigerator; otherwise suffocation or falling injury of the child may be caused.
1.6 Warnings for energy • Refrigerating appliances might not operate consistently (possibility of defrosting of contents or temperature becoming too warm in the frozen food compartment) when sited for an extended period of time below the cold end of the range of temperatures for which the refrigerating appliance is designed.
2. Proper use of refrigerators 2.1 Placement • Before initial start, keep the refrigerator still for half an hour before connecting it to power supply. • Before the refrigerator is moved, take all objects inside out, fix the glass partitions, vegetable holder, freezing chamber drawers and etc.
2.2 Door handle installation precautions shall be taken to prevent fall of the handle from causing any personal injury. List of tools to be provided by the user Allen wrench (1) Screw hole (2) Screw (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) Assembly steps a.
2.3 Leveling feet Schematic diagram of the leveling feet (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) Adjusting procedures: a. Turn the feet clockwise to raise the refrigerator; b.
Page 13
1) Please power off this appliance before conduct this operation. Remove all food from door shelves. Fix the door by tapes. 2) Dismantle the upper decorative cover, screws and upper hinge.unplug the wiring connector of the top right side of refrigerator ( (1),(2) wiring connector). decorative cover upper hinge middle hinge...
Page 14
5) a) Remove the upper cover of refrigerating chamber door and the left decorative cover, install the upper hinge sleeve, door signal line to the other side and install the door upper cover. Dismantle the stopper, self-locking and sleeve pipe of refrigerating chamber door. Take out left self-locking of refrigerating chamber door and right decorative cover from accessory bag, assemble the sleeve pipe,left self-locking and stopper on bottom left of door with screw, and then install the right decorative cover.
decorative cover hinge cover (2) (3) 8) Take out the top left hinge from accessory bag. Put refrigerating chamber door on middle hinge, install top left hinge. Connect signal line terminal (4) with signal line terminal (1) ,connect signal line terminal (2) with signal line terminal(3);...
2.7 Energy saving tips • The appliance should be located in the coolest area of the room, away from heat producing appliances or heating ducts, and out of the direct sunlight. • Let hot foods cool to room temperature before placing in the appliance. Overloading the appliance forces the compressor to run longer.
3. Structure and functions 3.1 Key components Magnetic door switch LED light Shelf Door tray LED light Fruits and vegetables box Meat & Fish zone LED light Drawer (The picture above is only for reference.The actual configuration will depend on the physical product or statement by the distributor) Refrigerating chamber •...
Meat&Fish zone • • Near to the back and bottom of the drawer, food may be frozen slightly, the food what should not be frozen can not be placed in. • 3.2 Functions Display screen Operation button A. Temperature setting button 1.
Page 19
Lock /unlock In the unlock state, long press the lock button for 3 seconds, enter the lock state, the icon lights up and buzzer sounds, it means the display panel is locked, at this time, button operation cannot be implemented; In the lock state, long press the lock button for 3 seconds, enter the unlock state, the icon...
Page 20
Vacation mode Click the button to set vacation mode, the icon lights up. The refrigerating chamber temperature display goes out, the freezing chamber temperature displays -18 °C. Under vacation mode, click the button again, the icon goes out, it exits vacation mode. The set temperature of refrigerating chamber and freezing chamber will automatically switch back to set temperature before vacation mode.
4. Maintenance and care of the appliance 4.1 Overall cleaning • Dusts behind the refrigerator and on the ground shall be timely cleaned to improve the cooling effect and energy saving. The interior of the refrigerator should be cleaned regularly to avoid odor.
4.3 How to take out the pearl cotton block inside humidification shelf components • The pearl cotton is used to separate the humidity-conditioning shelf from the moisture- proof cover (to prevent the moisture-proof cover from falling off during transportation). After unpacking, the user needs to remove this pearl cotton from the moisture-retaining shelf assembly.
5. Trouble shooting • You may try to solve the following simple problems by yourself. If them cannot be solved, please contact the after-sales department. Occurrence Possible cause/inspection items Check whether the appliance is connected to power or whether the plug is in well contact Failed operation Check whether the voltage is too low Check whether there is a power failure or partial circuits have tripped...
6. Disposal of your appliance Correct Disposal of this product: This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
Page 25
Hefei Hualing Co.,Ltd. 176 Jin Xiu Road, Hefei Economic and Technological Development MADE IN CHINA...