Table of Contents
Advertisement
Setup 2
2
The default settings are marked with
File Number
Selects the method used to assign file numbers to images.
Series
Reset
USB Connect
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the cable for multi-use terminal (DSC-W55) or the USB cable (DSC-
W35).
PictBridge
PTP
Mass Storage
Auto
For details on the operation 1 page 50
.
Assigns numbers to files in sequence even if the recording
folder or the "Memory Stick Duo" is changed. (When the
replaced "Memory Stick Duo" contains a file with a number
higher than the last assigned number, a number one higher
than the largest number is assigned.)
Starts from 0001 each time the folder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Connects the camera to a PictBridge compliant printer
(page 83).
When [PTP] (Picture Transfer Protocol) is set and the camera
is connected to a computer, the images in the recording folder
on the camera are copied to the computer. (Compatible with
Windows XP and Mac OS X.)
Establishes a Mass Storage connection between the camera
and a computer or other USB device (page 67).
The camera recognizes automatically and sets up
communication with a computer or PictBridge compliant
printer (pages 67 and 83).
• If the camera and a PictBridge compliant printer cannot be
connected when set to [Auto], change the setting to
[PictBridge].
• If the camera and a computer or other USB device cannot be
connected when set to [Auto], change the setting to [Mass
Storage].
59
Hide quick links:
Advertisement
Chapters
Table of Contents
