Page 1
WM-FX161 SERVICE MANUAL Canadian Model E Model Model Name Using Similar Mechanism WM-FX101 Tape Transport Mechanism Type MF-WMFX103Y-48 SPECIFICATIONS 87.6 – 108 MHz (Canadian) 87.6 – 107.9 MHz (E) AM: 530 – 1,710 kHz (Canadian) 531 – 1,602 kHz (E) RADIO CASSETTE PLAYER MICROFILM...
TABLE OF CONTENTS SERVICING NOTES GENERAL ..............3 HOW TO CHANGE THE CERAMIC FILTERS This model is used two ceramic filters of CF2 and X2. DISASSEMBLY You must used same type of color marked ceramic filters in order ............4 to meet same specifications.
SECTION 2 DISASSEMBLY • This set can be disassembled in the order shown below. CABINET (REAR) ASS’Y MECHANISM DECK (MF-WMFX103Y-48) MAIN BOARD AND MAIN BOARD CASSETTE HOLDER Note: Follow the disassembly procedure in the numerical order given. CABINET (REAR) ASS’Y 1 Insert the precision screw driver (1.4 mm flat-blade) in to the slit at claw A and release the claw.
Page 5
MAIN BOARD 2 Remove the solder of the motor wire. 1 head flexible board (CN301) 4 MAIN board 3 three claws CASSETTE HOLDER 2 Portion B to release the hinge plate. 1 Insert a precision screwdriver (1.4 mm flat-blade) vertically in to portion A to release the hinge plate.
SECTION 3 DIAL POINTER SETTING Note: Follow the assembly procedure in the numerical order given. pointer align 2 Align pointer with arrow marked side as shown in pointer Fig. 1 and then fit to groove in the order of A and B . Fig.
SECTION 5 SECTION 4 ELECTRICAL ADJUSTMENTS MECHANICAL ADJUSTMENTS PRECAUTION PRECAUTION 1. Clean the following parts with a denatured-alcohol-moistened • Supplied voltage : 2.5 V swab: • Switch and control position playback head pinch roller VOL control : maximum capstan rubber belt AVLS switch : NORM 2.
Page 8
AM Section RADIO SECTION Setup : FM Section FM AM TAPE switch : AM Setup : FM AM TAPE switch : FM Procedure : AM RF Signal Procedure : generator Put the lead-wire antenna close to FM RF Signal the set level meter generator TP (FM RF IN)
SECTION 7 EXPLODED VIEWS NOTE: • Items marked “*” are not stocked since they • -XX and -X mean standardized parts, so they are seldom required for routine service. Some may have some difference from the original delay should be anticipated when ordering one.
Page 10
(2) MECHANISM DECK SECTION (MF-WMFX103Y-48) HP901 M901 Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark X-3367-902-1 ARM (N) ASSY, PINCH 3-354-868-01 BELT 3-364-328-01 SPRING, COMPRESSION 3-352-758-21 SCREW (M1.7), TOOTHED LOCK 3-910-635-01 SCREW HP901 1-500-115-11 HEAD, MAGNETIC (PLAYBACK) 3-910-647-01 LEVER (PR/O), PLAY M901 1-698-353-11 MOTOR, DC (REEL/CAPSTAN)
SECTION 8 MAIN ELECTRICAL PARTS LIST NOTE: • Items marked “*” are not stocked since they • Due to standardization, replacements in the When indicating parts by reference are seldom required for routine service. parts list may be different from the parts speci- number, please include the board.
Page 12
MAIN Ref. No. Part No. Description Remark Ref. No. Part No. Description Remark < JACK > R605 1-216-073-00 METAL CHIP 1/10W R606 1-216-097-00 RES,CHIP 100K 1/10W J301 1-750-061-11 JACK, DC (POLARITY UNIFIED TYPE) (DC IN 3V) < VARIABLE RESISTOR > J302 1-565-287-11 JACK (2) RV301...