aus Safety instructions
Installation
Following installation, ensure
■
that the back of the
dishwasher is not freely
accessible (protection
against contact due to hot
surface).
Install and connect the
■
appliance according to the
installation and assembly
instructions.
Prior to installation,
■
disconnect the dishwasher
from the power supply.
Ensure that the protective
■
conductor system of the
domestic supply has been
correctly installed.
The electrical connection
■
conditions must correspond
with the specifications on the
dishwasher rating plate 9*.
If the power cord of this
■
appliance is damaged, it
must be replaced with a
particular power cord.
To prevent injury, the power
cord may be purchased from
customer service only.
If the dishwasher is installed
■
in a high-sided unit, the unit
must be secured properly.
If the dishwasher is installed
■
below or above other
domestic appliances, follow
the information for
installation in combination
with a dishwasher in the
installation instructions for
the particular appliances.
6
Also follow the installation
■
instructions for the
dishwasher to ensure that all
appliances are operated
safely.
If there is no information or if
■
the installation instructions
do not include the
appropriate information,
contact the manufacturer of
these appliances to ensure
that the dishwasher can be
installed above or below
these appliances.
If you cannot obtain any
■
information from the
manufacturer, you must not
install the dishwasher above
or below these appliances.
If you install a microwave
■
oven above the dishwasher,
the microwave oven may be
damaged.
Install built-under or
■
integratable appliances only
under continuous worktops
which have been screwed to
adjacent cupboards to
ensure stability.
Do not install the appliance
■
near heat sources (radiators,
heat storage tanks, cookers
or other appliances which
generate heat) and do not
install under a hob.