hit counter script
Sony RDR-GXD310 Service Manual
Hide thumbs Also See for RDR-GXD310:
Table of Contents

Advertisement

RDR-GXD310/HXD710/HXD910
SERVICE MANUAL
System
Laser: Semiconductor laser
Transmission standards: DVB-T
Channel coverage: UHF channels B21 - B69
The above channel coverage merely ensures the
channel reception within these ranges. It does not
guarantee the ability to receive signals in all
circumstances.
Aerial out: 75-ohm asymmetrical aerial socket
Video recording format: MPEG Video
Audio recording format/applicable bit
Inputs and outputs
LINE 2 OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
LINE 2 IN/LINE 4 IN
(AUDIO): Phono jack/2 Vrms/more than
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p,
LINE 1 – TV: 21-pin
LINE 3: 21-pin
DV IN (RDR-HXD710/HXD910 only):
DIGITAL OUT (OPTICAL): Optical output jack/
DIGITAL OUT (COAXIAL): Phono jack/
PHOTO: RDR-HXD910
: RMT-D222P
SPECIFICATIONS
rate: Dolby Digital 2 ch/256 kbps
C: 0.3 Vp-p (PAL)
22 kilohms
C: 0.3 Vp-p (PAL)
CVBS IN/OUT
S-Video/RGB OUT (upstream)
CVBS IN/OUT
S-Video/RGB IN
S-Video OUT (downstream)
4-pin/i.LINK S100
–18 dBm (wave length: 660 nm)
0.5 Vp-p/75 ohms
RMT-D221P/D222P
COMPONENT VIDEO OUT
(Y, P
/C
, P
/C
):
B
B
R
R
Phono jack/Y: 1.0 Vp-p, P
/C
: 0.7 Vp-p,
B
B
P
/C
: 0.7 Vp-p
R
R
HDMI OUT (RDR-HXD910 only):
Type A (19-pin)
General
Power requirements: 220-240 V AC, 50/
60 Hz
Power consumption:
RDR-GXD310:35 W
RDR-HXD710:57 W
RDR-HXD910:60 W
Dimensions (approx.): 430 ⋅ 75 ⋅ 328 mm
(width/height/depth) incl. projecting parts
Hard disk drive capacity:
RDR-HXD710: 160 GB
RDR-HXD910: 250 GB
Mass (approx.):
RDR-GXD310: 4.4 Kg
RDR-HXD710: 5.2 Kg
RDR-HXD910: 5.3 Kg
Operating temperature: 5ºC to 35ºC
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1)
Mains lead (1)
Aerial cable (1)
Remote commander (remote) (1)
R6 (size AA) batteries (2)
Specifications and design are subject to change
without notice.
Compatible colour systems
This recorder is designed to record using the PAL
colour system and play back using the PAL or
NTSC colour systems.

DVD RECORDER

UK Model

Advertisement

Table of Contents
loading

Summary of Contents for Sony RDR-GXD310

  • Page 1: Dvd Recorder

    (VIDEO): Phono jack/1.0 Vp-p RDR-HXD910: 250 GB (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, Mass (approx.): C: 0.3 Vp-p (PAL) RDR-GXD310: 4.4 Kg LINE 2 IN/LINE 4 IN RDR-HXD710: 5.2 Kg (AUDIO): Phono jack/2 Vrms/more than RDR-HXD910: 5.3 Kg 22 kilohms Operating temperature: 5ºC to 35ºC...
  • Page 2 COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
  • Page 3: Table Of Contents

    TABLE OF CONTENTS SERVICE NOTE Additional Information ···························································· 1-25 Troubleshooting ·································································· 1-25 DISK REMOVAL PROCEDURE IF THE TRAY Self-diagnosis Function (When letters/numbers appear in the CANNOT BE EJECTED (FORCED EJECTION) ············ 5 display) ··············································································· 1-26 BOARDS CONNECTION ················································· 5 Notes About This Recorder ················································· 1-27 About i.LINK (RDR-HX710/HX910 only) ·························...
  • Page 4 • AV-096 (5/8) (CONECTORS) IC PIN FUNCTION DESCRIPTION SCHEMATIC DIAGRAM ···························· 4-19 5-1. IT CONTROL IC (IC604: M306H3MC-065U2 • AV-096 (6/8) (SYSTEM CONTROL) (AV-096 BOARD)) ·························································· 5-1 SCHEMATIC DIAGRAM ···························· 4-21 5-2. CPU (IC104: HD6417306BL200AV • AV-096 (7/8) (VIDEO IN) (RD-058 BOARD)) ·························································...
  • Page 5: Service Note

    SERVICE NOTE 1. DISK REMOVAL PROCEDURE IF THE TRAY CANNOT BE EJECTED (FORCED EJECTION) Remove the upper case. Insert the stiff wire in the hole and eject the tray. Hole Open the tray. Fig. 1 The stiff wire. Fig. 2 2.
  • Page 6 MEMO — 6 —...
  • Page 7: General

    The use of optical instruments with this or replaced, it will be done at the transmission may require product will increase eye hazard. As discretion of Sony. All contents of authorization from the cable Information the laser beam used in this DVD...
  • Page 8: Quick Guide To Disc Types

    Quick Guide to Disc Types Recordable and playable discs Recording Features Editing Features Icon used in Formatting Compatibility with other DVD Type Disc Logo Auto Manual Record Change Delete this manual (new discs) players (finalising) Rewrite A-B Erase Playlist Chapter Chapter 16:9 sizes title name...
  • Page 9: Hookups And Settings

    Step 2: Connecting the Aerial Cable Hookups and Settings Connect the aerial cable by following the steps below. Do not connect the mains lead until you reach Hooking Up the Recorder “Step 5: Connecting the Mains Lead” on page 21. Follow steps 1 to 7 to hook up and adjust the settings of the recorder.
  • Page 10: Recorder ··········································································

    “MEGALOGIC” is a registered trademark of Grundig About the SMARTLINK features Using the PROGRESSIVE button Corporation. “EASYLINK” and “CINEMALINK” are trademarks (for SCART connections only) of Philips Corporation. By using the PROGRESSIVE button, you can “Q-Link” and “NexTView Link” are trademarks of select the signal format in which the recorder If the connected TV (or other connected Panasonic Corporation.
  • Page 11 Notes recorder and the last input source selected on the Number buttons • If the supplied remote interferes your other Sony DVD 2 +/– recorder or player, change the command mode number TV. Point your remote at the recorder when using for this recorder (page 24).
  • Page 12: Connecting A Vcr Or Similar Device

    Connecting to the LINE 2 IN or LINE 4 IN jacks Connecting a VCR or Similar Device Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If the After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
  • Page 13: Recording A Programme

    Press z REC. z Hints Move the cursor down the TOOLS menu • By reformatting, you can change the recording format 2. Recording a Programme until “Disc Info” is selected, and press Recording starts. on DVD-RWs, or record again on DVD-RWs that have ENTER.
  • Page 14: Displaying The Playing Time And Play Information

    B Available functions for DVD VIDEOs z Hints Order Sorted 4. Displaying the Playing • If “DTS” is set to “Off” in “Audio” setup, the DTS angle/ audio/ subtitle, etc.), Unseen Title in order of when the titles were track selection option will not appear on the screen or playback data for DATA DVDs and Time and Play Information (HDD only)
  • Page 15: Labelling And Protecting A Disc

    Protecting a disc 6. Labelling and Protecting 7. Playing the Disc on Other a Disc DVD Equipment (Finalise) - RW Insert a disc. You can execute options effective for the entire - RW - RW Video See “Inserting a Disc” on page 29. disc using the Disc Information display.
  • Page 16: Programme Information

    Press the </M/m/, buttons or enter a Some examples of category types are as Viewing programmes related to a Programme information follows: channel number using the number buttons All Programmes: This gives a complete to move around the list. specific category. channel list.
  • Page 17: Index

    Select “Favourites,” and press ENTER Indicates the currently viewed channel Moving to a different favourite list Index The DTV Settings- Favourites List 1 display appears. Favourite List 1 Thu 27 Oct 10:32 While a Favourite List is displayed, press DDE NEWS 15 The Index application is an easy way to display a Favourites List 1 repeatedly the YELLOW button on the...
  • Page 18 Select an item using </, and adjust z Hint To cancel this function, press TOOLS while the Recording TV programmes using using M/m. You can play the recorded programme by selecting the Timer List is displayed. Select “Rec Mode programme title in the Title List. Adjust”...
  • Page 19: Checking/Changing/Cancelling Timer Settings (Epg)

    Press the M/m buttons to select the “DVD Line Rec. Picture Size”: Sets the Creating chapters in a title Checking/Changing/ picture size of the programme to be recorded options. Once highlighted, press the on the DVD. ENTER button. Cancelling Timer Settings The recorder can automatically divide a recording •...
  • Page 20: Recording From Connected Equipment

    Press INPUT SELECT repeatedly to select Press REC PAUSE to set this recorder to • While the recorder is standing by for Synchro- Recording From Connected Recording, the Auto Clock Set function (page 89) does “L3.” record pause. not work. Equipment Select the line input audio when recording Insert the source tape into the connected...
  • Page 21 Effective at low volume. playback quickly with sound. • Standard: Creates three sets of virtual rear speakers. Effective when you use two separate front speakers. *TVS was developed by Sony to produce home surround sound with just a stereo TV. 1-15...
  • Page 22: Searching For A Title/Chapter/Track, Etc

    Example: Play a DVD while recording to the Playing a previous recording while Searching by title number or time Searching for a Title/ HDD. making another (Simultaneous Rec code While recording, press DVD and insert the Chapter/Track, etc. and Play) DVD into the recorder.
  • Page 23: Erasing And Editing

    z Hints About MP3 audio tracks and JPEG MP3 audio tracks or JPEG image About playback order of albums, • If you add numbers (01, 02, 03, etc.) to the front of the track/file names when you store the tracks (or files) in image files files that the recorder can play tracks, and files...
  • Page 24: Creating And Editing A Playlist

    Notes “A-B Erase”: Erases a section of the title Erasing a section of a title Dividing a title (Divide) • Images or sound may be momentarily interrupted at the (page 74). point where you erase a section of a title. “Delete Chapter”: Erases chapter units of the (A-B Erase) •...
  • Page 25: Dubbing (Hdd Y Dvd)

    To play the Playlist title Press TOOLS to select “Combine,” and • For a title whose picture size (16:9 or 4:3) is press ENTER. mixed: Press TOOLS while the Title List menu is turned Dubbing (HDD y DVD) – When dubbed from the HDD to DVD-RW on.
  • Page 26: Dv Dubbing

    Select a dubbing mode by pressing M/m. To adjust the settings for each title To automatically adjust the dubbing mode Dubbing multiple titles (Dub (Auto Dub Mode) You can make detailed settings for each of the Fast* Selected Titles) selected titles during Multiple Title Dubbing. If there is not enough available space on the target disc, the recorder automatically selects a dubbing In step 6 of “Dubbing multiple titles (Dub...
  • Page 27: Recording An Entire Dv Format Tape

    Select “DV EDIT,” and press ENTER. Select “OK,” and press ENTER. Recording an Entire DV Program Edit The display asks if you want to start selecting A new Scene List menu appears with the scenes. selected scene. Format Tape (One Touch To add a scene, select “Add.”...
  • Page 28: Digital Tv Settings (Dtv Settings)

    Service DDE News DDE News Notes NCE 5 NCE 5 • Sony recommend that you always leave this option set Channel J Channel J Digital Teletext to “On”. Digital Teletext • To receive the upgrade, the unit must be powered on...
  • Page 29: Video Settings (Video)

    Pause Mode (HDD/DVDs only) Progressive Mode 16:9 Video Settings (Video) Selects the picture quality in pause mode. DVD software can be divided into two types: film based software and video based software. Video Auto The picture, including subjects based software is derived from TV, such as Video settings will adjust items related to the that move dynamically, is output dramas and sit-coms, and displays images at 30...
  • Page 30: Recording And Parental Control Settings (Features)

    Note Notes • Audio (HDMI) (RDR-HXD910 only) If the HDMI OUT jack (RDR-HXD910 only) is Recording and Parental • The actual chapter mark interval may vary depending Selects the type of audio signal output from the connected to equipment not compatible with MPEG on the amount of information contained in the video to HDMI OUT jack.
  • Page 31: Easy Setup (Resetting The Recorder)

    DVD equipment is assigned the same Command Mode. Be sure to match the Command Mode switch on the remote to the setting made here. For details, see “If you have a Sony DVD player or more than one Sony DVD recorder” on page 24.
  • Page 32: Self-Diagnosis Function

    Then, keep /1 on the recorder LOCKED” appears in the front panel display. pressed for about ten seconds until , Contact your Sony dealer or local authorized “WELCOME” appears in the front panel display. Remote control Sony service facility.
  • Page 33: Notes About This Recorder

    Required i.LINK cable P </M/m/,/ENTER button (25) i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a INFO button (43) Use the Sony i.LINK 4-pin-to-4-pin cable (during trademark approved by many corporations.
  • Page 34: Glossary

    Y ./> (previous/next) buttons (62) (subtitle) button (62) Front panel display Z H (play) button (60) es DISPLAY button (34) X (pause) button (62) TIME/TEXT button (35) x (stop) button (60) (angle) button (62) The H button has a tactile dot*. ef INPUT SELECT button (59, 85) DVD RW wj z REC button (31)
  • Page 35: Language Code List

    Hard disk drive (page 3) Progressive format (page 19) Language Code List A hard disk drive is a whole mechanical system Compared to the Interlace format that alternately that consists of disks and drive. Disks are flat, shows every other line of an image (field) to create For details, see page 89.
  • Page 36 MEMO 1-30E...
  • Page 37: Disassembly

    RDR-HXD910 SECTION 2 DISASSEMBLY NOTE: The following flow chart shows the disassembly procedure. GXD310 Case block assembly (Page 2-2) Tray cover Power supply block DVD section A-004 board D. C. fan assembly (Page 2-8) (Page 2-5) (Page 2-8) (Page 2-11) (Page 2-2) DE-001 board Front panel section...
  • Page 38: Case Block Assembly

    NOTE: Follow the disassembly procedure in the numerical order given. 2-1. CASE BLOCK ASSEMBLY 3 Case block assembly 2 Three tapping screws (+BV 3 x 10) 1 Four tapping screws 2-2. TRAY COVER ASSEMBLY 3 Two claws Hole 4 Tray cover assembly 2 Open the tray.
  • Page 39: Front Panel Section

    2-3. FRONT PANEL SECTION 2 Front panel section 1 Seven claws 2-4. SLIDE DOOR 1 Tapping screw (+B 2.6 x 6) 2 Door (spring) 6 Slide door 3 Tapping screw (+B 2.6 x 6) 4 Door (spring) 5 Four claws...
  • Page 40: Board, Fr-232 Board

    2-5. FL-150 BOARD, FR-232 BOARD 4 FL sheet (GXD310), FL cover (HXD710/HXD910) 6 Flexible flat cable 3 Connector (FAF-001) (CN101) (CN1302) 5 FL-150 board 2 Two tapping screws (+BV 3 x 8) (CN1301) (CN102) 1 Flexible flat cable (FFS-001) 8 Cursor 7 Connector (CN103) 9 Three tapping screws...
  • Page 41: Dvd Section

    2-7. HARD DISK (HXD710/HXD910) 7 Remove the HDD shield plate in the direction of the arrows A and B . 6 Hard disk section 1 Connector 8 Two tapes 9 Flexible flat cable (FRH-002) (CN1802) 5 Hard disk base, 0 Flexible cover Four dampers 3 Ground spring (HDD)
  • Page 42: Dvd Drive

    2-9. DVD DRIVE 3 Two screws HXD710/HXD910 (+B 3 x 3) 8 Flexible cover 2 Harnesses 4 MD (L) bracket 7 MD (R) bracket 1 Remove the harnesses in the direction of the arrow. 0 DVD drive 6 Two screws (+B 3 x 3) 5 Flexible flat cable (FRD-001)
  • Page 43: Board

    2-11. DE-001 BOARD 1 Pin 3 Board to board 4 DE-001 board CN001 DE-001 board CN002 CN3001 Flexible flat cable (FAD-003) 2 Flexible flat cable (FAD-003) (CN002) 2-12. ER-036 BOARD 4 ER-036 board 1 Flexible flat cable (FAE-007) (CN901) 3 Four tapping screws (+BV 3 x 10) 2 Flexible flat cable (FAE-007) (CN902)
  • Page 44: Power Supply Block

    2-13. POWER SUPPLY BLOCK 4 Four tapping screws (+BV 3 x 8) 1 Connector (CN2) 2 Connector (CN3) 5 Remove the Power supply block in the direction of the arrow. 3 Tapping screw (+P 3 x 8) 2-14. A-004 BOARD 5 Two tapping screws (+BV 3 x 8) 6 A-004 board...
  • Page 45: Board

    2-15. RD-58 BOARD 4 Connector (CN464) 7 Six tapping screws (+BV 3 x 8) 8 A-004 board, Bracket 5 Flexible flat cable (FVA-001) (CN461) 6 Flexible flat cable (FAD-003) (CN462) HXD710/HXD910 1 Flexible flat cable 3 Flexible flat cable (FRH-002) (CN603) (FRA-001) (CN460) RD-058 board 2 Flexible flat cable...
  • Page 46: Board

    2-16. AV-096 BOARD 1 Two tapping screws (+BV 3 × 8) 7 Flexible flat cable 2 RD bracket (FAE-007) (CN902) 8 Flexible flat cable 5 Flexible flat cable (FAE-007) (CN901) (FVA-001) (CN3002) 9 Connector (CN1201) 6 Connector (CN701) 3 Pin 4 Two pins 7 Flexible flat cable (FAF-001) (CN602)
  • Page 47: Fan

    2-17. D.C. FAN 4 Remove the D.C. fan in the direction of the arrow. 3 Two tapping screws 2 Connector (+BV 3 x 10) (CN1201) 1 Pin 2-18. CIRCUIT BOARDS LOCATION Power supply block ER-036 board HXD710/HXD910 CN-243 board HXD910 MI-056 board DE-001 board FL-150 board...
  • Page 48: Block Diagrams

    RDR-GXD310/HXD710/HXD910 SECTION 3 BLOCK DIAGRAMS 3-1. OVERALL BLOCK DIAGRAM DE-001 A-004 MI-056 BOARD RD-058 BOARD AV-096 BOARD (1/2) BOARD BOARD IC402 SCL/SDA IF AGC TU3001 IF1,IF2 FEDATA0-7 DTTV0-7 656BUFV0-7 HDMI CONT IC001 IC100 IC2300 AERIAL DIGITAL TUNER CN201 DIGTAL D/A CONV...
  • Page 49 RDR-GXD310/HXD710/HXD910 3-2. AV-096, FR-232, FL-150 BOARD BLOCK DIAGRAM AV-096 BOARD CN3001 TU3001 IFAGC IFAGC DIGITAL TUNER DE-001 BOARD AERIAL CN001 FR-232 BOARD CN902 Q101,102 AVLINK CN101 LED DIM J3801 DIMMER SWITCH CN502 C_OUT LED STB VIDEO SYNCHRO REC L3RC VO_YC...
  • Page 50: Board

    RDR-GXD310/HXD710/HXD910 3-3. RD-058 BLOCK DIAGRAM (1/2) HXD910, HXD710 RD-058 BOARD (1/2) CN-243 656 BUF V0-7 656 BUF HD, 656 BUF VD 656 BUF FD, 656 BUF CK 17,15 BOARD 13,11 AF14,AE14,AC13 AB12,AD,12,AF12 AF11,AF10,AE10 CRB AT1D0-15 IDE D0-D15 CN1701(1/3) Q1201 AD11,AE12,AC12...
  • Page 51 RDR-GXD310/HXD710/HXD910 3-4. RD-058 BOARD BLOCK DIAGRAM (2/2) RD-058 BOARD (2/2) IC201 AWAKE DONE IC105 IC306 STATUS1 (2/3) (2/2) XFLMCS0 IC202 AV-096 UNHD0-31 XAMUTE XFLMRST5 BOARD XVMUTE XFLMRST3 128M CN502 CN1702(3/3) FLASH XUNRD1 MEMORY XUNWE0,2 UNHA2-24 XFLMCS0 IC110 IC107 VSYNC ITREQ5...
  • Page 52: Board Block Diagram

    RDR-GXD310/HXD710/HXD910 3-5. A-004 BOARD BLOCK DIAGRAM A-004 BOARD CN404 8,10 IC201 12,14 63,61,83,81 RADD0 16,18 90,99,97,106 X200 CLOCK RADD0-14 20,22 161,170,187,179 27MHz RADD14 24,26 115,163,150 28,30 GP_INTB FWEB FWEB Q360,361,304 FWEB CN461 FOEB FOEB VID-Y DTT-Y FOEB BUFF DTT-Y GCS1B...
  • Page 53 RDR-GXD310/HXD710/HXD910 3-6. ER-036, DE-001 BOARD BLOCK DIAGRAM ER-036 BOARD IC105 Q104-109 V IN AUX CVBS/Y R IN BUFFER AUX R/C G IN CN105 AUXG BI/CQ AUXB C OUT BLAKING IN CN103 FUNCTION SW IN LINE 3/ DECODER XVMUTE ALL MUTE...
  • Page 54: Board Block Diagram

    RDR-GXD310/HXD710/HXD910 3-7. MI-056 BOARD BLOCK DIAGRAM MI-056 BOARD (HXD910) IC402 CN201 SM_T_SCL CSCL TX2+ TMDS DATA2+ X401 HDMI SM_T_SDA 8MHz CONT CSDA TX2- TMDS DATA2- CN401 SM_DDC_SCL TX1+ DSCL TMDS DATA1+ XEXRSTT SM_DDC_SDA DSDA TX1- TMDS DATA1- DLON NOT USED...
  • Page 55: Power Block Diagram (1/2)

    RDR-GXD310/HXD710/HXD910 3-8. POWER BLOCK DIAGRAM (1/2) AV-096 BOARD CN1201 IC1201 UNSW 12V FAN 12V FAN DRIVE SWITCHING REGULATOR(POWER BLOCK) IC107 CN502 UNSW4V SH SW3.3V 3.3V D109 CN101 T101 IC108 D101 L101,102 INLET LINE CONVERTER SH SW1.5V Q301 CN101 D301 L301...
  • Page 56: Power Block Diagram (2/2)

    RDR-GXD310/HXD710/HXD910 3-9. POWER BLOCK DIAGRAM (2/2) A-004 BOARD RD-058 BOARD Q304,360,361 Q312,362,363 Q311,364,365 CN101 IC300 UN3.3V PCONT AUDIO DAC VIDEO BUFF(Y) VIDEO BUFF(CR) VIDEO BUFF(CB) IC108 UN5V IC107 IC101 IC105 IC110 CN404 IC104 IC109 SW3.3V BUFFER EEOROM BUFFER BUFFER 5.0V...
  • Page 57: Schematic Diagrams And Printed Wiring Boards

    RDR-GXD310/HXD710/HXD910 SECTION 4 SCHEMATIC DIAGRAMS AND PRINTED WIRING BOARDS 4-1. FRAME SCHEMATIC DIAGRAM HXD910 HDMI OUT J3702 LINE1-TV LINE 3/DECODER LINE 2 OUT LINE 4 IN J3801 J802 COMPONENT VIDEO OUT AERIAL DIGITAL IN/OUT MI-056 BOARD ER-036 BOARD CN602 CN2101...
  • Page 58: Schematic Diagrams

    RDR-GXD310/HXD710/HXD910 4-2. SCHEMATIC DIAGRAMS WAVEFORMS AV-096 A-004 RD-058 THIS NOTE IS COMMON FOR SCHEMATIC DIAGRAMS BOARD BOARD BOARD (In addition to this, the necessary note is printed in each block) X601 J3801 S-VIDEO Y OUT X200 X102 (For schematic diagrams) •...
  • Page 59: 1/3) (27Mhz Clock Generator)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-69 for printed wiring board. • Refer to page 4-4 for waveforms. A-004 BOARD(1/3) 27MHz CLOCK GENERATIOR :Voltage measurement of the CSP IC and the Transistors with mark,is -REF.NO.: SERIES- not possible.
  • Page 60: 2/3)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-69 for printed wiring board. A-004 BOARD(2/3) NAND FLASH MEMORY,DDR SDRAM,STRAP RESISTORS -REF.NO.:1000 SERIES- XX MARK:NO MOUNT IC202 NO MARK:REC/PB MODE IC202 HYB25D256160CE-6 RDATA[0] DDR SDRAM 256Mb RB213 RDATA[1] 1kx4 RDATA[2] DQ[0]...
  • Page 61: 3/3) (Video/Audio/Reset Ic Power & Connectors)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-69 for printed wiring board. A-004 BOARD(3/3) CN404 100P VIDEO/AUDIO/RESET IC/POWER & CONNECTORS -REF.NO.: SERIES- FWEB FWEB TO(1/3) RADD[0] XX MARK:NO MOUNT FOEB RADD[0] NO MARK:REC/PB MODE GCS1B TO(1/3) RADD[1] RADD[1] FCS0B...
  • Page 62: 1/8) (Power & Fan)

    RDR-GXD310/HXD710/HXD910 NO MARK:REC/PB MODE AV-096 BOARD(1/8) CN1201 JL1202 POWER & FAN FAN12V JL1203 SENS TO FAN -REF.NO.: SERIES- JL1205 JL1204 XX MARK:NO MOUNT FAN_DET CN101 JL107 UNSW12V UNSW12V JL108 SW3.3V UNSW4V UNSW4V JL109 R1205 UNSW12V IC1201 JL110 IC1201 UNSW12V IC101...
  • Page 63 RDR-GXD310/HXD710/HXD910 AV-096 BOARD(2/8) NO MARK:REC/PB MODE AUDIO IN -REF.NO.: SERIES- XX MARK:NO MOUNT EUAUINL1 EUAUINR3 TO(5/8) EUAUINL3 EUAUINR1 FA_INR C221 AU3INR C211 C214 C213 C218 AU3INL TO(7/8) R228 FA_INL R223 R224 R226 R227 ± 0.5% SIGNAL PATH ± 0.5% ± 0.5% ±...
  • Page 64 RDR-GXD310/HXD710/HXD910 AV-096 BOARD(3/8) NO MARK:REC/PB MODE R :REC MODE AUDIO OUT DIGITAL OUT P :PB MODE -REF.NO.: SERIES- XX MARK:NO MOUNT R307 8200 R322 ± 0.5% 1500 AOUTL- C310 R324 R308 560p 8200 ± 0.5% ± 0.5% AOUTL+ C319 R314...
  • Page 65: 4/8) (Digital Tuner)

    RDR-GXD310/HXD710/HXD910 AV-096 BOARD(4/8) NO MARK:REC/PB MODE DIGITAL TUNER -REF.NO.: SERIES- XX MARK:NO MOUNT IC3001 L3001 47uH SW 32V REG SW12V IC3001 TK11819MTL L3002 JL3001 JL3012 11.9 UNSW5V SIGNAL PATH V-IN C3005 R3002 TO(1/8) 11.9 0.1u Q3002 DTT3.3V VIDEO SIGNAL 2SB1561T100Q 33.4...
  • Page 66 RDR-GXD310/HXD710/HXD910 AV-096 BOARD(5/8) CONNECTORS -REF.NO.: SERIES- XX MARK:NO MOUNT CN902 CN501 CN502 JL924 JL502 JL534 SW2.5V TO(6/8) AVLINK AVLINK TO(3/8) SPDIF_AV SPDIF_AV SW2.5V JL925 JL535 SW3.3V N.C. SW3.3V JL926 JL504 JL563 TU5V DGND SW2.5V JL927 JL505 JL564 DGND SW3.3V ADDATI...
  • Page 67 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-3 for waveforms. AV-096 BOARD(6/8) SYSTEM CONTROL PS602 0.5A -7.7 -7.7 -5.6 -REF.NO.: SERIES- C667 XX MARK:NO MOUNT R638 Q602 470u 2SB1561T100Q 6.3V Q608 -7.0 -6.2 SW -8V REG 2SD1766-T100-QR P.CONT NO MARK:REC/PB MODE...
  • Page 68 RDR-GXD310/HXD710/HXD910 AN_GND TO(8/8) AV-096 BOARD(7/8) C705 VIDEO IN 0.01u CN701 JL701 S2 SW -REF.NO.: SERIES- JL702 Y2_IN Y2 IN XX MARK:NO MOUNT JL703 C706 AN GND 0.01u JL704 C2_IN C2 IN NO MARK:REC/PB MODE JL734 C713 S2SW FL-150 R751 AN GND 0.01u...
  • Page 69: 8/8) (Video Out)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-3 for waveforms. AV-096 BOARD(8/8) NO MARK:REC/PB MODE VIDEO OUT -REF.NO.: SERIES- XX MARK:NO MOUNT D812 R856 L803 DAP202K-T-146 R853 22uH Q807 XNENTMUTE MUN2213T1 SWITCH-1 TO(6/8) Q808 MUN2113T1 WIDE SWITCH-2 R822 AUOUTL2...
  • Page 70: Digital Converter

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-69 for printed wiring board. • Refer to page 4-4 for waveforms. DE-001 BOARD DIGITAL CONVERTER -REF.NO.: SERIES- XX MARK:NO MOUNT C022 R014 NO MARK:REC/PB MODE 0.1u RB002 RB001 47x4 47x4 C015 R013 0.1u...
  • Page 71: Video/Audio I/O Interface

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-4 for waveforms. NO MARK:REC/PB MODE ER-036 BOARD R :REC MODE P :PB MODE VIDEO/AUDIO I/O INTERFACE -REF.NO.:50,000 SERIES- CN105 JL101 JL102 EURO_MUTE JL103 Q104 MSB709-RT1 JL104 R118 EUAUOUTL JL105 C123 AUGND...
  • Page 72: Indicator Drive

    RDR-GXD310/HXD710/HXD910 ND1301 FLUORESCENT TUBE FL-150 BOARD INDICATOR DRIVE JL1316 C1312 SEG21 0.1u -REF.NO.:40,000 SERIES- JL1317 SEG20 JL1328 SEG19 JL1329 SEG18 C1308 NO MARK:REC/PB MODE C1307 0.01u JL1331 SEG17 JL1332 SEG16 JL1333 SEG15 JL1330 JL1334 CN1301 SEG14 JL1301 JL1335 IT_GND SEG13...
  • Page 73 RDR-GXD310/HXD710/HXD910 FR-232 BOARD LED DRIVE,FUNCTION KEY -REF.NO.:40,000 SERIES- R115 R109 2200 R114 4700 NO MARK:REC/PB MODE Q102 MSB709-RT1 LEDIM PWR SW Q101 DTC114EKA-T146 SWITCH D102 IC102 SLR-332VRT32 BU2050F-E2 IC102 TIMER REC R116 JL122 LED DRIVE JL125 JL136 CN101 17P JL137...
  • Page 74 RDR-GXD310/HXD710/HXD910 SM_SDA SM_SDA SM_SCL MI-056 BOARD(1/3) SM_SCL XHDMIINT1 XHDMIINT1 PS101 IP CONV.,SDRAM XHDMIRST1 XHDMIRST1 UNSW6V XHDMICS -REF.NO.:50,000 SERIES- XHDMICS TO(3/3) SCIF2_SDI XX MARK:NO MOUNT SCIF2_SDI TO(2/3) C104 C108 SW3.3VB SCIF2_SDO 0.1u 0.1u SCIF2_SDO SW1.8VC NO MARK:REC/PB MODE HDMI_DL HDMI_DL C101...
  • Page 75 RDR-GXD310/HXD710/HXD910 MI-056 BOARD(2/3) SIGNAL PATH NO MARK:REC/PB MODE HDMI TH R :REC MODE P :PB MODE VIDEO SIGNAL -REF.NO.:50,000 SERIES- XX MARK:NO MOUNT CHROMA Y/CHROMA SM_T_SCL SM_T_SDA R242 R206 TO(3/3) C206 C208 C212 FL203 XTXINT 0.1u 0.1u 0.001u SW1.8VC XTXRST SW3.3VB...
  • Page 76: 3/3) (Hdmi Control)

    RDR-GXD310/HXD710/HXD910 MI-056 BOARD(3/3) HDMI CONTROL -REF.NO.:50,000 SERIES- XX MARK:NO MOUNT SM_DDC_SCL NO MARK:REC/PB MODE SM_DDC_SDA XIPRST XTXRST SM_SDA SM_SCL XHDMIINT1 HDMI_DL IC401 TC7W32FU(TE12R) XHDMICS R466 SCIF2_SCK TO(2/3) CL431 R444 4700 TO(1/3) C402 0.01u XHDMIRST1 R429 IC401 SM_T_SCL CL401 C/N.C P20/PWCK...
  • Page 77 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(1/14) I2C0_SCL I2C0_SDA IC101 M24C32-WMN6T(B) R178 R190 -REF.NO.:20,000 SERIES- 2200 2200 ADMUTE TO(12/14) XX MARK:NO MOUNT ADMUTE R162 R166 NO MARK:REC/PB MODE 2200 2200 CPUCK66G XGPSINT...
  • Page 78: 2/14) (Nand-F, Flash Rom, Icecn)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. UNHA18 IC201 RD-058 BOARD(2/14) MBM29Z0003PCN-KE1 NAND-F,FLASH ROM,ICECN UNHD0 UNHD0 UNHA24 -REF.NO.:20,000 SERIES- UNHD1 UNHD1 UNHA17 XX MARK:NO MOUNT UNHD2 UNHD2 UNHA16 UNHD3 BYTE NO MARK:REC/PB MODE UNHD3...
  • Page 79 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(3/14) BUFFER NO MARK:REC/PB MODE -REF.NO.:20,000 SERIES- R :REC MODE P :PB MODE XX MARK:NO MOUNT UNHD0 XUNHDGT UNHD0 UNHD1 XSWHDGT0 UNHD1 UNHD2 UNHD2 TO(4/14) XSWGT0...
  • Page 80: 4/14) (Grips(Host Glue))

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. XSHCS6 XSHCS6 RD-058 BOARD(4/14) XSHCS5 NO MARK:REC/PB MODE XSHCS5 R :REC MODE XSHCS4 XSHCS4 GRIPS(HOST GLUE) P :PB MODE XSHCS2 TO(1/14) XSHCS2 -REF.NO.:20,000 SERIES- XSHCS1 XSHCS1 XX MARK:NO MOUNT...
  • Page 81: 5/14) (Carib Power)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. TO(6/14) TO(14/14) TO(7/14) TO(14/14) RD-058 BOARD(5/14) CARIB,POWER -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT HXD910 ONLY IC606 :Voltage measurement of the CSP IC and the Transistors with mark,is BUFFER not possible.
  • Page 82: 6/14) (Carib Ddr)

    RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(6/14) :Voltage measurement of the CSP IC CARIB DDR and the Transistors with mark,is not possible. -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT NO MARK:REC/PB MODE R :REC MODE...
  • Page 83 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(7/14) NAZCA2 Note:Resistors are mounted to the location where C818 -REF.NO.:20,000 SERIES- and C822 are printed. XX MARK:NO MOUNT EXCEPT R880 GXD310 R3851 :Voltage measurement of the CSP IC...
  • Page 84 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(8/14) NAZCA2 DDR DGND TO(7/14) SW2.5VA_DDR -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT :Voltage measurement of the CSP IC and the Transistors with mark,is not possible. CL901 DDRA_CK...
  • Page 85 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. • Refer to page 4-4 for waveforms. NO MARK:REC/PB MODE RD-058 BOARD(9/14) IC1001 -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT PLL2FSEL IC1402 TO(1/14) PLL1FSEL IC1001 BU2357FV-E2 ADAC R1015 C1003...
  • Page 86 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. • Refer to page 4-4 for waveforms. RD-058 BOARD(10/14) NO MARK:REC/PB MODE VDEC -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT VID5V L1201 C1242 C1219 R1249 D1201 10uH R1240 C1218 0.01u...
  • Page 87 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(11/14)(EXCEPT GXD310) :Voltage measurement of the CSP IC NO MARK:REC/PB MODE and the Transistors with mark,is R :REC MODE not possible. P :PB MODE -REF.NO.:20,000 SERIES-...
  • Page 88 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(12/14) AV CONNECTOR, HDMI-IF -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT FL2101 UNSW6V DGND C2101 C2102 0.1u 0.1u R1714 CN1701 CN1702 JL1736 JL1777 JL1732 SPDIF_AV _SW2.5V TO(5/14) SPDIF_AV SW2.5V...
  • Page 89 RDR-GXD310/HXD710/HXD910 For Schematic Diagram • Refer to page 4-71 for printed wiring board. RD-058 BOARD(13/14) RD-058 BOARD(14/14) NO MARK:REC/PB MODE JTAG DTT-IF -REF.NO.:20,000 SERIES- -REF.NO.:20,000 SERIES- XX MARK:NO MOUNT XX MARK:NO MOUNT JL1806 CARTDO SW3.3V JL1807 TO(5/14,9/14,10/14) VDCTDO DGND IC2300...
  • Page 90 RDR-GXD310/HXD710/HXD910 SW12V SWITCHING REGULATOR Q301 UNSW12V REG C112 L104 680p L105 (SRV1794EK) IC301 DETECT D304 Q301 P301 T101 SW5V D301 11EQS06/10 L301 1.25A 2SJ438 SF5LC20U 3.7uH Q302 R303 R102 R301 C301 Z102 2SJ525 SW12V 1000p DSP-501N 1/4W 1/2W 1/4W R307...
  • Page 91 RDR-GXD310/HXD710/HXD910 4-3. PRINTED WIRING BOARDS • : Uses unleaded solder. A-004 BOARD(SIDE A) A-004 BOARD(SIDE B) C467 CN464 R472 R474 CN460 C366 R473 C376 C465 C466 C370 C371 R311 R340 R341 X200 IC362 Q304 Q311 Q312 IC361 C207 C203 C202...
  • Page 92 RDR-GXD310/HXD710/HXD910 • : Uses unleaded solder. RD-058 BOARD (SIDE A) CN101 RD-058 BOARD (SIDE A) CN102 CN1901 D-8 CN201 CN2101 B-8 R3669 R3666 C657 R3670 R3671 R3667 R3668 CN2300 ZU003 ZU004 PG001 CN2201 C-8 R1725 R1414 CN601 R1452 R1415 CN801...
  • Page 93 RDR-GXD310/HXD710/HXD910 • : Uses unleaded solder. RD-058 BOARD (SIDE B) RD-058 BOARD (SIDE B) CN1701 D-6 CN1702 A-5 R3853 R856 R1745 JL625 R3672 D101 JL1775 JL1776 JL1733 C854 IC804 JL852 JL1779 CN1702 JL1728 JL1730 JL1770 JL1734 JL1764 JL1772 D1601 JL1780...
  • Page 94 RDR-GXD310/HXD710/HXD910 SECTION 5 IC PIN FUNCTION DESCRIPTION 5-1. IT CONTROL IC (IC604: M306H3MC-065U2 (AV-096 BOARD)) Pin No. Pin Name Function GRADE Fixed at “L” SIRCS Remote control signal input AV_LINK_IN AV LINK signal input FLD_DATA Output of FLD data signal FLD_IN Fixed at “L”...
  • Page 95 Pin No. Pin Name Function FLD_CS Output of FLD driver chip select signal LED_STB Output of stand-by signal AREA0 Fixed at “L” AREA1 Fixed at “H” IMUTE Not used FL_PCONT Output of FLD DC/DC converter power control signal TU_BST_C2 Not used EEP_WP EEPROM writing protect signal input EEP_SCL...
  • Page 96 Pin No. Pin Name Function IT_CON_TEMP Temperature control signal input BS_C/N_DET Not used (Open) AVSS – Analog GND TU_G_MAX Tuner gain detect signal input VREF – Power supply input (5V) AVCC – Power supply input (5V) XL3MUTE Not used (Open) START Oscillation selection input SYNCIN...
  • Page 97 5-2. CPU (IC104: HD6417306BL200AV (RD-058 BOARD)) Pin No. Pin Name Function EXTAL Crystal resonator (33MHz) RESET Reset VSS-CPG CPG GND Bus ready (To IC105) NF/PJ7 Not used (Pull-down) VSS-PLL2 PLL2 GND DCK/PJ 1 Divide Ckio 1/1,1/2,1/3 NF/PJ 4 Not used (Open) NF/PJ 5 Not used (Open) NF/PJ 2...
  • Page 98 Pin No. Pin Name Function Address (SHHA) Bus start NF/PE5 To IC107 Address (SHHA) NF/PE2 Not used (Open) NF/PE3 Not used (Open) Data (SHHD) NF/PE4 From EPG Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) Data (SHHD) VSSQ IO GND...
  • Page 99 Pin No. Pin Name Function VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Address (SHHA) Address (SHHA) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Address (SHHA) Address (SHHA) Address (SHHA) Address (SHHA) WE3/DQM3/ICIOWR D31-D24 select signal WE2/DQM2/ICIORD D23-D16 select signal VDD ( SH-SW1.5VA ) Chip select 3...
  • Page 100 Pin No. Pin Name Function IRL0 Interrupt 0 (To CARIB) IRL1 Interrupt 1 (To CARIB) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND IRL2 Interrupt 2 (From NAZCA2) IRL3 Interrupt 3 (From GRIPS) VDDQ IO VDD ( SH-SW3.3V ) VSSQ IO GND Not used (Open)
  • Page 101 Pin No. Pin Name Function DRAK0 Not used (Open) Not used (Pull-up) SCIF0-TXD/PG5 SCIF0 transmit data/Port SCIF0-RXD/PG6 SCIF0 recive data/Port Not used (Pull-down) Not used (Pull-down) SCIF0-CLK/PG7 SCIF0 clock/Port SCIF1-RTS/PG2 Not used (Open) H-UDI clock VSSQ IO VDD ( SH-SW3.3V ) SCIF2-RTS/PH5 Not used (Open) SCIF1-CTS/PG3...
  • Page 102 Pin No. Pin Name Function VDD-PLL1 PLL1 VDD VSS-PLL1 PLL1 GND NF/PJ6 Not used (Pull-up) VDD-CPG CPG VDD ( SH-SW3.3V ) VDD-PLL2 PLL2 VDD XTAL Crystal resonator (33MHz)
  • Page 103 MEMO 5-10E...
  • Page 104: Service Mode

    RDR-GXD310/HXD710/HXD910 SECTION 6 SERVICE MODE This is the diagnostics to define the faulty position. The diagnostics can be executed using the remote commander (Remote Control Mode 3) and monitor. To execute the service mode, connect the VIDEO OUT (L2 OUT) connector to the monitor.
  • Page 105: Screen Transition In The Service Mode

    9) HDD MODE • • <RETURN> • MODEL SYSCON Version [ MENU 2 T MENU 1 SONY ID [ <RETURN> HDD Serial ID [ EXCEPT RDR-GXD310 PATH TEST menu << PATH TEST MENU >> 1) NAZCA 2) CARIB-NAZCA PB < >...
  • Page 106: Service Mode Menu Items And Description

    MODEL When the key “9” is pressed down, the monitor display moves SYSCON Version [ to the hard disk check screen. SONY ID HDD Serial ID ](GXD310) 6-4. Device Check Menu (1/2) << DEVICE TEST MENU 1/2 >>...
  • Page 107: Screen Transition In The Test Mode

    6-7. Screen Transition in the TEST Mode TEST MODE menu << TEST MODE MENU >> << Version No. >> 1) Version No. 2) Error History • < > 3) Command History • • 4) NAND Factory Setup 5) History Clear •...
  • Page 108: Hard Disk Check Menu

    Except RDR-GXD310 6-8. Hard Disk Check Menu << HDD MODE >> When the key “1” is pressed down, the ID check will be 1) Indicate ID executed. When the key “2” is pressed down, performance check will be 2) Performance Check executed.
  • Page 109 MEMO 6-6E...
  • Page 110: Adjustment

    RDR-GXD310/HXD710/HXD910 SECTION 7 ADJUSTMENT 7-1. Video System Adjustment 7-2. S-Video Output S-Y Check <Purpose> This check confirms that the S-video output. If it adjusted incorrectly, Preparing for Adjustment color will be to dark or too thin. 1. Equipments • Oscilloscope...
  • Page 111: S-Video Output S-C Level Check

    7-3. S-Video Output S-C Level Check 7-5. Component Video Output B-Y Check <Purpose> <Purpose> This check confirms that the S-video output S-C conforms to the This check confirms that the B-Y signal of the component video PAL standard. If it is adjusted incorrectly, color will be too dark or output is correct.
  • Page 112: Repair Parts List

    1-829-813-11 CABLE, FLEXIBLE FLAT (FFS-001) X-2067-105-1 COVER ASSY (1335), TRAY (HXD710) A-1129-138-A FL-150 (AG) COMPL X-2067-103-1 COVER ASSY (1385), TRAY (HXD910) 2-583-904-01 SHEET, FL (RDR-GXD310) X-2067-092-1 PANEL ASSY, FRONT (1305) (GXD310) 2-189-250-11 COVER, FL (HXD710/HXD910) X-2067-093-1 PANEL ASSY, FRONT (1335) (HXD710)
  • Page 113: Chassis Section-1

    8-1-2. CHASSIS SECTION-1 HXD910 supplied supplied supplied Chassis section-2 (See page 8-3) Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks * 51 A-1129-122-A RD-058 (CG) S COPML (HXD310) 3-077-331-01 +BV3 (3-CR) * 51 A-1129-130-A RD-058 (DG) S COPML (HXD710) 1-830-769-11 CABLE, FLEXIBLE FLAT (FVA-001) * 51 A-1129-181-A RD-058 (EG) S COMPL (HXD910)
  • Page 114: Chassis Section-2

    8-1-3. CHASSIS SECTION-2 HXD710/HXD910 HXD710/HXD910 supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied supplied TU3001 supplied supplied Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks 3-086-778-01 FOOT 1-797-247-11 DRIVE, DVD DRW-V35P 3-077-331-01 +BV3 (3-CR) 3-088-023-01 +B3 (3-CR) 3-087-675-01 6-32UNCX5 (HXD710/HXD910) 2-159-921-21 COVER, FLEXIBLE (HXD710/HXD910)
  • Page 115: Electrical Parts List

    A-004 8-2. ELECTRICAL PARTS LIST NOTE: • Due to standardization, replacements in the • COILS When indicating parts by reference number, uH: µH parts list may be different from the parts please include the board name. specified in the diagrams or the components •...
  • Page 116 A-004 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R271 1-218-953-11 RES-CHIP 1/16W R311 1-218-953-11 RES-CHIP 1/16W < IC > R340 1-218-953-11 RES-CHIP 1/16W R341 1-218-953-11 RES-CHIP 1/16W IC100 6-702-498-21 IC uPD61120AF1-100-JN1-A R342 1-218-957-11 RES-CHIP 2.2K 1/16W IC201 6-705-271-01 IC KA5SDKASO1TSL...
  • Page 117 A-004 AV-096 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB205 1-233-576-11 RES, CHIP NETWORK 100 (3216) C225 1-107-826-11 CERAMIC CHIP 0.1uF RB206 1-233-388-11 RES, NETWORK 68 (3216) C226 1-165-883-11 CERAMIC CHIP 10000PF 630V RB207 1-233-388-11 RES, NETWORK 68 (3216) C301 1-126-947-11 ELECT 47uF...
  • Page 118 AV-096 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C646 1-162-970-11 CERAMIC CHIP 0.01uF C3004 1-162-974-11 CERAMIC CHIP 0.01uF C647 1-162-970-11 CERAMIC CHIP 0.01uF C3005 1-107-826-11 CERAMIC CHIP 0.1uF C648 1-162-970-11 CERAMIC CHIP 0.01uF C3006 1-107-826-11 CERAMIC CHIP 0.1uF C649 1-162-970-11 CERAMIC CHIP...
  • Page 119 AV-096 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks D304 8-719-914-44 DIODE DAP202K < JACK > D602 8-719-988-61 DIODE 1SS355TE-17 D603 8-719-075-77 DIODE EC10DA40-TE12 J802 1-818-063-11 JACK, PIN (3P) D604 8-719-069-56 DIODE UDZSTE-176.2B J3702 1-818-363-11 JACK BLOCK, PIN D605 8-719-075-77 DIODE EC10DA40-TE12 J3801...
  • Page 120 AV-096 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks Q616 8-729-421-22 TRANSISTOR UN2211 R230 1-216-837-11 METAL CHIP 1/10W Q617 8-729-045-17 TRANSISTOR 2SB1561T100Q R231 1-216-837-11 METAL CHIP 1/10W Q618 8-729-010-05 TRANSISTOR MSB709-RT1 R232 1-216-801-11 METAL CHIP 1/10W Q619 8-729-421-22 TRANSISTOR UN2211...
  • Page 121 AV-096 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R367 1-216-864-11 SHORT CHIP R696 1-216-817-11 METAL CHIP 1/10W R386 1-216-864-11 SHORT CHIP R699 1-216-809-11 METAL CHIP 1/10W R388 1-216-821-11 METAL CHIP 1/10W R703 1-216-864-11 SHORT CHIP R389 1-216-813-11 METAL CHIP 1/10W...
  • Page 122 AV-096 CN-243 DE-001 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1614 1-216-833-11 METAL CHIP 1/10W R3612 1-216-864-11 SHORT CHIP R1616 1-216-809-11 METAL CHIP 1/10W R1617 1-216-864-11 SHORT CHIP < THERMISTOR > R1619 1-216-809-11 METAL CHIP 1/10W R1620 1-216-833-11 METAL CHIP...
  • Page 123 DE-001 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CONNECTOR > C111 1-107-826-11 CERAMIC CHIP 0.1uF C112 1-107-826-11 CERAMIC CHIP 0.1uF * CN001 1-573-828-11 BOARD TO BOARD CONNECTOR (RECEPTACLE) C113 1-107-826-11 CERAMIC CHIP 0.1uF C114 1-107-826-11 CERAMIC CHIP 0.1uF...
  • Page 124 ER-036 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < DIODE > < COIL > D101 8-719-075-77 DIODE EC10DA40-TE12 L101 1-400-145-21 INDUCTOR 47uH D114 8-719-069-56 DIODE UDZSTE-176.2B L102 1-419-368-11 INDUCTOR 47uH D115 8-719-083-63 DIODE UDZSTE-1713B D116 8-719-069-56 DIODE UDZSTE-176.2B <...
  • Page 125 ER-036 FL-150 FR-232 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R171 1-216-833-11 METAL CHIP 1/10W < DIODE > R173 1-216-808-11 METAL CHIP 1/10W R174 1-216-864-11 SHORT CHIP D1303 8-719-067-40 DIODE STZ6.8N-T146 R175 1-216-864-11 SHORT CHIP D1304 8-719-067-40 DIODE STZ6.8N-T146 R176...
  • Page 126 FR-232 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks < CAPACITOR > JR073 1-216-295-91 SHORT CHIP JR074 1-216-295-91 SHORT CHIP C102 1-107-726-91 CERAMIC CHIP 0.01uF JR075 1-216-295-91 SHORT CHIP JR077 1-216-295-91 SHORT CHIP C103 1-107-726-91 CERAMIC CHIP 0.01uF JR078 1-216-296-11 SHORT CHIP...
  • Page 127 FR-232 MI-056 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks S112 1-771-410-21 SWITCH, TACTILE (DVD)(HXD710/HXD910) C179 1-164-943-81 CERAMIC CHIP 0.01uF S113 1-771-410-21 SWITCH, TACTILE (HDD)(HXD710/HXD910) C180 1-164-943-81 CERAMIC CHIP 0.01uF S114 1-771-410-21 SWITCH, TACTILE (SYSTEM MENU) C181 1-164-943-81 CERAMIC CHIP 0.01uF...
  • Page 128 MI-056 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R273 1-218-990-81 SHORT CHIP R274 1-218-990-81 SHORT CHIP < IC > R276 1-218-990-81 SHORT CHIP R278 1-218-990-81 SHORT CHIP IC101 6-708-021-01 IC CXD9866R R279 1-218-990-81 SHORT CHIP IC102 6-705-992-11 IC HY57V161610ETP-7DR IC203...
  • Page 129 MI-056 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB130 1-234-400-21 CONDUCTOR, NETWORK (2010X4) C135 1-125-777-11 CERAMIC CHIP 0.1uF RB131 1-234-400-21 CONDUCTOR, NETWORK (2010X4) C136 1-125-777-11 CERAMIC CHIP 0.1uF RB132 1-234-371-21 RES, NETWORK 47 (1005X4) C137 1-125-777-11 CERAMIC CHIP 0.1uF...
  • Page 130 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C402 1-125-777-11 CERAMIC CHIP 0.1uF C709 1-125-777-11 CERAMIC CHIP 0.1uF C403 1-125-777-11 CERAMIC CHIP 0.1uF C710 1-125-777-11 CERAMIC CHIP 0.1uF C508 1-125-777-11 CERAMIC CHIP 0.1uF C711 1-125-777-11 CERAMIC CHIP 0.1uF C509 1-125-777-11 CERAMIC CHIP...
  • Page 131 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C845 1-164-943-81 CERAMIC CHIP 0.01uF C1233 1-164-943-81 CERAMIC CHIP 0.01uF C846 1-125-777-11 CERAMIC CHIP 0.1uF C1234 1-164-943-81 CERAMIC CHIP 0.01uF C847 1-164-943-81 CERAMIC CHIP 0.01uF C1235 1-164-943-81 CERAMIC CHIP 0.01uF C849 1-125-777-11 CERAMIC CHIP...
  • Page 132 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks C1623 1-125-777-11 CERAMIC CHIP 0.1uF C2101 1-125-777-11 CERAMIC CHIP 0.1uF (HXD710/HXD910) (HXD910) C1624 1-125-777-11 CERAMIC CHIP 0.1uF C2102 1-125-777-11 CERAMIC CHIP 0.1uF (HXD710/HXD910) (HXD910) C1625 1-164-943-81 CERAMIC CHIP 0.01uF C2103 1-125-777-11 CERAMIC CHIP...
  • Page 133 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks FL803 1-234-867-11 FILTER, EMI REMOVAL (SMD) IC801 6-702-302-01 IC TK11133CSCL-G FL804 1-234-867-11 FILTER, EMI REMOVAL (SMD) IC802 8-753-217-76 IC CXD4705GB FL805 1-234-867-11 FILTER, EMI REMOVAL (SMD) IC901 6-706-691-01 IC EM6A9320BI-5MGD FL806 1-234-867-11 FILTER, EMI REMOVAL (SMD)
  • Page 134 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R156 1-218-961-11 RES-CHIP 4.7K 1/16W R330 1-218-965-11 RES-CHIP 1/16W R157 1-218-961-11 RES-CHIP 4.7K 1/16W (HXD710/HXD910) R158 1-218-990-81 SHORT CHIP R337 1-218-965-11 RES-CHIP 1/16W R159 1-218-961-11 RES-CHIP 4.7K 1/16W (HXD910) R161...
  • Page 135 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R605 1-218-935-11 RES-CHIP 1/16W R692 1-218-990-81 SHORT CHIP (HXD910) R702 1-218-990-81 SHORT CHIP R606 1-218-935-11 RES-CHIP 1/16W R703 1-218-990-81 SHORT CHIP (HXD910) R704 1-218-935-11 RES-CHIP 1/16W R607 1-218-961-11 RES-CHIP 4.7K 1/16W...
  • Page 136 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R904 1-218-929-11 RES-CHIP 1/16W R1413 1-218-990-81 SHORT CHIP 0 (HXD710/HXD910) R906 1-218-990-81 SHORT CHIP R1414 1-218-941-81 RES-CHIP 1/16W R907 1-218-871-11 METAL CHIP 0.5% 1/10W R1415 1-218-933-11 RES-CHIP 1/16W R908 1-218-871-11 METAL CHIP...
  • Page 137 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R1631 1-208-943-11 METAL CHIP 220K 0.5% 1/16W R1682 1-218-937-11 RES-CHIP 1/16W (HXD710/HXD910) (HXD710/HXD910) R1634 1-218-973-11 RES-CHIP 1/16W R1683 1-218-937-11 RES-CHIP 1/16W (HXD710/HXD910) (HXD710/HXD910) R1635 1-218-973-11 RES-CHIP 1/16W R1684 1-218-937-11 RES-CHIP 1/16W...
  • Page 138 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R2111 1-218-929-11 RES-CHIP 1/16W R3089 1-218-965-11 RES-CHIP 1/16W (HXD910) R3092 1-218-937-11 RES-CHIP 1/16W R2112 1-218-990-81 SHORT CHIP 0 (HXD910) R3093 1-218-961-11 RES-CHIP 4.7K 1/16W R2119 1-218-990-81 SHORT CHIP 0 (HXD910) R3094 1-218-938-11 RES-CHIP...
  • Page 139 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks R3637 1-218-965-11 RES-CHIP 1/16W R3839 1-218-941-81 RES-CHIP 1/16W R3638 1-218-965-11 RES-CHIP 1/16W R3840 1-218-941-81 RES-CHIP 1/16W R3639 1-218-965-11 RES-CHIP 1/16W R3841 1-218-941-81 RES-CHIP 1/16W R3650 1-218-935-11 RES-CHIP 1/16W R3842 1-218-941-81 RES-CHIP...
  • Page 140 RD-058 Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB321 1-234-702-11 RES, NETWORK 68 (1005X4) RB629 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB322 1-234-702-11 RES, NETWORK 68 (1005X4) RB630 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB323 1-234-702-11 RES, NETWORK 68 (1005X4) RB631 1-234-400-21 CONDUCTOR, NETWORK (2010X4) RB324...
  • Page 141 RD-058 ACCESSORIES Ref. No. Part No. Description Remarks Ref. No. Part No. Description Remarks RB825 1-234-371-21 RES, NETWORK 47 (1005X4) RB2307 1-234-372-21 RES, NETWORK 100 (1005X4) RB826 1-242-963-21 RES, NETWORK 33 (1005X4) RB2308 1-234-372-21 RES, NETWORK 100 (1005X4) RB827 1-242-963-21 RES, NETWORK 33 (1005X4) RB829 1-234-369-21 RES, NETWORK 10 (1005X4) (HXD910) <...
  • Page 142 Ref. No. Part No. Description Remarks ACCESSORIES ************ 1-479-362-11 REMOTE COMMANDER (RMT-D221P)(GXD310) 1-479-363-11 REMOTE COMMANDER (RMT-D222P) (HXD710/HXD910) 1-751-271-71 CORD, CONNECTION (AV) 1-696-593-11 CORD, CONNECTION (PAL) 1-827-269-12 CORD, POWER 2-636-511-11 MANUAL, INSTRUCTION (HXD710/HXD910) 2-636-510-11 MANUAL, INSTRUCTION (GXD310) ************************************************************ The components identified by mark 0 or dotted Note : line with mark 0 are critical for safety.
  • Page 143 RDR-HXD910 Sony Corporation 2005I1600-1 Home Electronics Network Company 9-874-890-11 ©2005.9 — 190 — Published by Quality Assurance Dept.
  • Page 144 PRINTING THE SERVICE MANUAL The PDF of this service manual is not designed to be printed from cover to cover. The pages vary in size, and must therefore be printed in sections based on page dimensions. NON-SCHEMATIC PAGES Data that does NOT INCLUDE schematic diagrams are formatted to 8.5 x 11 inches and can be printed on standard letter-size and/or A4-sized paper. SCHEMATIC DIAGRAMS The schematic diagram pages are provided in two ways, full size and tiled.

This manual is also suitable for:

Rdr-hxd710Rdr-hxd910

Table of Contents