Table of Contents
Advertisement
Application Guide
*
EX101
Notes:
• When operating the camera connected to the encoder, you can configure the default
operation speed. Please note that performance depends on the connected camera if the
operation speed is set outside a protocol's specified range.
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?AnalogCamPanSpeed=value
http://ip_adr/command/ptzf.cgi?AnalogCamTiltSpeed=value
http://ip_adr/command/ptzf.cgi?AnalogCamZoomSpeed=value
http://ip_adr/command/ptzf.cgi?AnalogCamFocusSpeed=value
4.2.6. Focus Near Limit Setting
*
*
EP550
Note:
For settable limit position value, see Appendix 3.
CGI
ptzf.cgi
CGI Syntax:
http://ip_adr/command/ptzf.cgi?FocusNearLimit=value
Sony Network Camera
*
*
*
(*Ver.1.2 or later)
EX101E
EX104
EX154
Parameter
AnalogCamPanSpeed
AnalogCamTiltSpeed
AnalogCamZoomSpeed 0 to 8
AnalogCamFocusSpeed
*
*
(*Ver.1.74 or later)
ER550
ZP550
ZR550
Parameter
FocusNearLimit
Value
Sets the pan operation speed for the connected
0 to 100
camera.
Sets the tilt operation speed for the connected
0 to 100
camera.
Sets the zoom operation speed for the connected
camera.
Sets the focus operation speed for the connected
0 to 8
camera.
Value
Sets the focus near limit.
<limit position>
19
Pan/Tilt/Zoom/Focus
Description
Description
June, 2013 / V3.1
- Quick Links:
- Features
Hide quick links:
Advertisement
Table of Contents
