Table of Contents
Advertisement
Step Component
17 Handle
1. Detachment
(Front panel)
2. Attachment
18 Handle
1. Detachment
(Side panel)
2. Attachment
AMP Air Conditioning
Procedure
1) Remove the front panels. ["2)" of Step.1]
2) Remove the cushioning without tearing it.
(Fig.17-1)
3) Use a fl athead screwdriver or something to
press on the 3 clamp hooks on the handle.
(Fig.17-2)
1) install it in the reverse of the procedure to
remove it.
• The cushioning for the handles acts as
waterproofing, so carefully stick it back on its
original position so there are no gaps caused
by it ripping or lifting up.
• Press the top edge of the cushioning (A)
up against the place which is a step lower,
press its left edge up against cushioning
(C), and stick it in place.
• After cushioning (A) has been stuck, stick
cushioning (B) in place. (Fig. 17-2)
1) Remove the side panels. [Step.3]
2) Use a fl athead screwdriver or something to
press on the 3 clamp hooks on the handle.
(Fig.18-1, 18-2)
1) install it in the reverse of the procedure to
remove it.
Cushioning (C)
(Fig.17-2)
(Fig. 18-1)
(Fig. 18-2)
168
www.ampair.co.uk | sales@ampair.co.uk
Remarks
Cushioning (B)
Front panel
Bump to cushion,
stick it.
Cushioning (A)
Bump to cushion,
stick it.
(Fig.17-1)
Flathead screwdriver
Clamp hook
(3 positions)
Handle
Side panel
Flathead screwdriver
Clamp hook
(3 positions)
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
