Toshiba TECRA A8 series Maintenance Manual page 236
Personal computer
Hide thumbs
Also See for TECRA A8 series:
- Maintenance manual (428 pages) ,
- User manual (306 pages) ,
- Resource manual (56 pages)
Table of Contents
Advertisement
3 Tests and Diagnostics
9. I/O ports
NOTE: Do not assign the same interrupt request level and I/O address to the serial port
10. Drives I/O
11. PCI Bus
3-102
Downloaded from
www.Manualslib.com
This option controls settings for the serial and parallel ports.
and PC card.
(a) Serial
Use this option to set the COM level for the serial port.
Not used
COM1
COM2 to COM4
(b) Parallel
This option sets the interrupt request level and I/O port base address for the
parallel port.
When the parallel port mode (see settings below) is set to ECP and "Not
used" is selected in Parallel, OPTION window is opened and DMA can be
set.
This option displays the address/interrupt level for hard disk drive and optical drive.
It is only for information and cannot be changed.
(a) Built-in HDD
This option displays the setting of the address and interrupt level of the HDD.
This cannot be changed.
(b) CD-ROM
This option displays the setting of the address and interrupt level of the
installed drive. This cannot be changed. Even if an installed drive is not CD-
ROM drive, "CD-ROM" is displayed.
This item displays the interrupt level for the Card Bus. It is for information only and
cannot be changed.
PCI BUS = IRQ10, IRQ11
[CONFIDENTIAL]
manuals search engine
Does not assign the serial port.
Assign the serial ports (Default)
Assign the serial ports
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
3.30 SETUP
- Quick Links:
- Figure 1-1 Front of the Computer
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
