Toshiba TECRA A8 series Maintenance Manual page 107
Personal computer
Hide thumbs
Also See for TECRA A8 series:
- Maintenance manual (428 pages) ,
- User manual (306 pages) ,
- Resource manual (56 pages)
Table of Contents
Advertisement
2.9 Optical Drive Troubleshooting
Procedure 2
The optical drive (DVD-ROM&CD-R/RW or DVD Super Multi drive) is connected to the
system board. The connectors may be disconnected from the system board or may be
damaged. Disassemble the computer following the steps described in Chapter 4, Replacement
Procedures and perform the following checks:
Check 1
Check 2
Check 3
TECRA A8 /Satellite Pro A120 Maintenance Manual (960-573)
Downloaded from
www.Manualslib.com
Connector Check and Replacement Check
Make sure the drive to test is firmly connected to CN1810 on the system board.
If the connection is loose, reconnect firmly and repeat Procedure 1. If there is still
an error, go to Check 2.
The drive may be defective or damaged. Replace the drive with a new one. If
there is still an error, go to Check 3.
Replace the system board with a new one following the steps in Chapter 4,
Replacement Procedures.
manuals search engine
2 Troubleshooting Procedures
[CONFIDENTIAL]
2-59
- Quick Links:
- Figure 1-1 Front of the Computer
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
