Related Manuals for Toshiba Satellite C50-C
Summary of Contents for Toshiba Satellite C50-C
- Page 1 User's Manual Satellite C50-C/C50t-C/C50D-C/ C50Dt-C Satellite C55-C/C55t-C/C55D-C/ C55Dt-C Satellite L50-C/L50t-C/L50D-C/ L50Dt-C Satellite P50-C/P50t-C/P50D-C/ P50Dt-C Series...
-
Page 2: Table Of Contents
Using the Touch Screen ............... 4-1 Using the Touch Pad ................4-2 The Keyboard ..................4-3 Optical disc drive .................. 4-5 CyberLink PowerDVD for TOSHIBA ........... 4-12 TOSHIBA Blu-ray Disc Player ............4-14 3D Playback on an External 3D Device ..........4-16 User's Manual... - Page 3 Special features ..................5-5 TOSHIBA Password Utility ..............5-7 TOSHIBA System Settings ..............5-10 USB Charge ..................5-11 TOSHIBA Media Player by sMedio TrueLink+ ........5-13 TOSHIBA PC Health Monitor .............. 5-15 TOSHIBA Product Improvement Program ........5-16 TOSHIBA Setup Utility ................ 5-17...
-
Page 4: Chapter 1 Toshiba Legal, Regulatory, And Safety
TOSHIBA computers. Copyright, Disclaimer, and Trademarks Copyright © 2015 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. -
Page 5: Regulatory Information
® The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toshiba Corporation and its affiliates is under license. The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. -
Page 6: Fcc Conditions
Only peripherals complying with the FCC class B limits can be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s Universal Serial Bus (USB 2.0 and 3.0) ports, HDMI... -
Page 7: Working Environment
EMC (Electromagnetic Compatibility) and safety standards. However, TOSHIBA cannot guarantee that this product still observes these EMC standards if options or cables not produced by TOSHIBA are connected or implemented. In this case the persons who have connected/implemented those options/cables have to provide assurance that the system (PC plus options/cables) still fulfils the required standards. - Page 8 Note that Canadian Department of Communications (DOC) regulations provide, that changes or modifications not expressly approved by TOSHIBA Corporation could void your authority to operate this equipment. This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
- Page 9 Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007, with phased deadlines to 2018. Toshiba will meet all REACH requirements and is committed to provide our customers with information about the presence in our articles of substances included on the candidate list according to REACH regulation.
-
Page 10: Following Information Is Only For Turkey
Toshiba meets all requirements of Turkish regulation 28300 “Restriction of the use of certain hazardous substances in electrical and electronic equipment”. -
Page 11: Video Standard Notice
Video Standard Notice THIS PRODUCT IS LICENSED UNDER THE AVC, THE VC-1 AND MPEG-4 VISUAL PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER FOR (I) ENCODING VIDEO IN COMPLIANCE WITH THE ABOVE STANDARDS ("VIDEO") AND/OR (II) DECODING AVC, VC-1 AND MPEG-4 VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED BY MPEG LA TO PROVIDE SUCH... - Page 12 Products derived from this software may not be called "OpenSSL" nor may "OpenSSL" appear in their names without prior written permission of the OpenSSL Project. Redistributions of any form whatsoever must retain the following acknowledgment: "This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit"...
-
Page 13: Freetype License Issues
This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer. - Page 14 Copyright 1996-2002, 2006 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction ============ The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license.
- Page 15 authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the `FreeType Project', be they named as alpha, beta or final release. `You' refers to the licensee, or person using the project, where `using' is a generic term including compiling the project's source code as well as linking it to form a `program' or `executable'.
- Page 16 -------------- Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: `FreeType Project', `FreeType Engine', `FreeType library', or `FreeType Distribution'.
-
Page 17: Energy Star® Program
Disposing of the computer and the computer's batteries The computer's battery pack is not user-accessible. Contact an authorized TOSHIBA service provider for details regarding how to dispose of the computer and the battery pack. Optical disc drive safety instructions Be sure to check the precautions at the end of this section. -
Page 18: General Precautions
General Precautions TOSHIBA computers are designed to optimize safety, minimize strain, and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. - Page 19 Provide adequate ventilation Always make sure that your computer and AC adaptor have adequate ventilation and are protected from overheating when the power is turned on or when an AC adaptor is connected to a power outlet (even if your computer is in Sleep Mode).
-
Page 20: Cleaning The Computer
Heat injury Avoid prolonged physical contact with the computer. If the computer is used for long periods, its surface can become very warm. While the temperature will not feel hot to the touch, if you maintain physical contact with the computer for a long time, for example if you rest the computer on your lap or if you keep your hands on the palm rest, your skin might suffer a low-heat injury. -
Page 21: Safety Icons
Turn off (shut down) the computer. Disconnect the AC adaptor and all peripherals before moving the computer. Close the display panel. Do not pick up the computer by its display panel. Before carrying your computer, shut it down, disconnect the AC adaptor and allow it to cool down. - Page 22 Please read. A note is a hint or advice that helps you make best use of your equipment. User's Manual 1-19...
-
Page 23: Chapter 2 Getting Started
This chapter provides an equipment checklist, and basic information to start using your computer. If you use an operating system that was not pre-installed by TOSHIBA, some of the features described in this manual might not function properly. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use. -
Page 24: Using Your Computer For The First Time
Double-click Tap the Touch Pad or click the left Touch Pad control button twice. Left-click the mouse twice. Tap the touch screen twice (only for touch screen models). Start The word "Start" refers to the " " button in the lower-left corner of the screen. - Page 25 Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
-
Page 26: Opening The Display
Figure 2-1 Connecting the power cord to the AC adaptor (2-pin plug) Figure 2-2 Connecting the power cord to the AC adaptor (3-pin plug) Either a 2-pin or 3-pin adaptor/cord is included with the computer depending on the model. Connect the DC output plug of the AC adaptor to the DC IN 19V jack on your computer. - Page 27 Figure 2-4 Opening the display panel 1. Display panel Product appearance depends on the model you purchased. Open and close the display panel with reasonable care. Opening it vigorously or slamming it shut could damage the computer. Do not put your fingers in the gap between the LCD panel and battery pack when closing your LCD, otherwise your fingers might get hurt.
-
Page 28: Turning On The Power
When opening or closing the display panel, place one hand on the palm rest to hold the computer in place and use the other hand to slowly open or close the display panel (Do not use excessive force when opening or closing the display panel). Turning on the power This section describes how to turn on the power. -
Page 29: Getting To Know Windows
When it is displayed, be sure to read the license terms and license agreement carefully. Getting to know Windows For detailed information on what is new and how to operate Windows, refer to Get Started in the Start menu. Start menu The Start menu is the launching pad for everything you can do in the Windows operating system, providing easy ways to access your apps, programs, websites and other important information. -
Page 30: Tablet Mode
voice, and Cortana answers your questions using information from the Internet. To use Cortana, an internal or external microphone is required. Action center You can review important notifications from apps or Windows in action center, and take action without having to open apps. It also provides quick action buttons to access to most-used settings instantly. -
Page 31: Turning Off The Power
Turning off the power The power can be turned off in one of the following modes, either Shut Down Mode, Sleep Mode or Hibernation Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the main screen of the operating system the next time it is turned on. - Page 32 Note that keyboard keys can only be used if the Wake-up on Keyboard option is enabled within the TOSHIBA System Settings. If the computer enters Sleep Mode while a network application is active, the application might not be restored when the computer is next turned on and the system returns from Sleep Mode.
-
Page 33: Hibernation Mode
Executing Sleep Mode You can enter Sleep Mode in one of following ways: Click Start -> Power and then select Sleep. Close the display panel. Note that this feature must be enabled within the Power Options. Press the power button. Note that this feature must be enabled within the Power Options. -
Page 34: Starting Hibernation Mode
Saves data to the Hard Disk Drive when the computer automatically shuts down because of a low battery condition. You can return to your previous working environment immediately when you turn on the computer. Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System Hibernate feature. -
Page 35: System Recovery
Media Restoring the pre-installed software from the Hard Disk Drive If you choose TOSHIBA Maintenance Utility to erase the hard disk drive, all data including the operating system and recovery image will be deleted. In that case, you cannot create recovery media or restore the pre-installed software from the recovery image. - Page 36 To perform this restoration, do the following: When you reinstall the Windows operating system, the hard disk will be reformatted and all data will be lost. Make sure to use the default Boot Mode option in TOSHIBA Setup Utility before restoring. Launch the TOSHIBA Setup Utility.
- Page 37 "Recovery Media", the "Recovery Media" cannot be created. However, if you have already created a "Recovery Media", you can use it to restore the recovery image. If you have not created "Recovery Media", contact TOSHIBA support for assistance. Restoring the pre-installed software from the Hard...
-
Page 38: Chapter 3 The Grand Tour
Chapter 3 The Grand Tour This chapter identifies the various components of the computer. It is recommended that you become familiar with each before you operate the computer. Legal Footnote (Non-applicable Icons) For more information regarding Non-applicable Icons, refer to the Legal Footnotes section. -
Page 39: Left Side
Left side The following figure shows the left side of the computer. Figure 3-2 The left side of the computer 1. DC IN 19V jack 4. Universal Serial Bus (USB 2.0 or 3.0) port* 2. LAN jack 5. Optical disc drive* 3. -
Page 40: Right Side
Universal Serial Bus One or two Universal Serial Bus ports, which (USB 2.0 or 3.0) port comply to the USB 2.0 or 3.0 standard, are provided on the left side of the computer. The USB port type might vary depending on the model you purchased. -
Page 41: Back
Memory media slot This slot lets you insert an SD™/SDHC™/ SDXC™ memory card, miniSD™/microSD™ Card and MultiMediaCard™. Refer to the Memory media section for more information. Keep foreign metal objects, such as screws, staples, and paper clips, out of the Memory media slot. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. -
Page 42: Underside
Figure 3-4 The back of the computer 1. Battery pack Battery pack The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected. For more detailed information on the use and operation of the battery pack, refer to the Battery section. -
Page 43: Front With The Display Open
Do not block the cooling vents. Keep foreign metal objects, such as screws, staples, and paper clips, out of the cooling vents. Foreign metal objects can create a short circuit, which can cause damage and fire, possibly resulting in serious injury. Carefully clean the dust on the surface of the cooling vents using a soft cloth. - Page 44 Figure 3-7 Top side of the touch screen model 1. Microphone 8. Display hinges 2. Web Camera LED 9. Power button 3. Web Camera 10. Power indicator 4. Microphone* 11. Keyboard 5. Wireless communication antennas 12. NFC (Near Field Communication) (not shown) detection area* 6.
- Page 45 For more information regarding Wireless LAN, refer to the Legal Footnotes section. Display screen 39.6 cm (15.6") LCD screen, is configured with one of the following resolutions depending on the model you purchased: HD, 1366 horizontal x 768 vertical pixels FHD, 1920 horizontal x 1080 vertical pixels UHD, 3840 horizontal x 2160 vertical pixels Be aware that, when the computer is operating...
-
Page 46: Internal Hardware Components
Battery pack This computer includes a battery pack inside. However, do not attempt to dismount or replace it by yourself. Contact an authorized TOSHIBA service provider, if necessary. The rechargeable lithium-ion battery pack provides power to the computer when the AC adaptor is not connected. - Page 47 Legal Footnote (CPU) For more information regarding CPU, refer to the Legal Footnotes section. Hard Disk Drive or The capacity of the hard disk drive varies Solid-State Drive depending on the model. Note that part of the hard disk overall capacity is reserved as administration space.
- Page 48 Graphics Processing Graphics processing unit (GPU) performance Unit might vary depending on product model, design configuration, applications, power management settings and features utilized. GPU performance is only optimized when operating in AC power mode and might decrease considerably when operating in battery power mode. Legal Footnote (Graphics Processing Unit (GPU)) For more information regarding Graphics Processing Unit (GPU), refer to Legal Footnotes...
-
Page 49: Power Condition Descriptions
NVIDIA Graphics Controllers. However, Toshiba does not guaranty compatibility of such NVIDIA drivers with your device. TOSHIBA shall not be liable for any damage resulting from NVIDIA’s drivers. Hence, your device shall not be covered under TOSHIBA’s limited warranty. -
Page 50: Power Indicator
DC IN/Battery indicator Check the DC IN/Battery indicator to determine the status of the battery pack and the power status with the AC adaptor connected. The following indicator conditions should be noted: Flashing amber The battery charge is low. The AC adaptor must be connected to recharge the battery. -
Page 51: Chapter 4 Operating Basics
Chapter 4 Operating Basics This chapter describes the basic operations of your computer, and highlights the precautions that must be taken when using it. Using the Touch Screen Some models are equipped with a touch screen. You can use your finger to manipulate icons, buttons, menu items, the on- screen keyboard, and other items on the touch screen. -
Page 52: Using The Touch Pad
Swipe Quickly move your finger in from the edge of the screen, without pausing when you first touch it. Swipe from the left edge: views all your open apps in task view. Swipe from the right edge: opens the Action center. -
Page 53: The Keyboard
The function keys (F1 ~ F12) are the 12 keys at the top of your keyboard. You can configure the function keys’ mode as "Special function mode" or "Standard F1-F12 mode" by clicking System Settings -> Function Key under TOSHIBA group in All apps. User's Manual... - Page 54 "Special function mode" allows you to use special functions without pressing the FN key. Special Standard F1- Function function mode F12 mode FN + F1 Allows you to search your computer, the web, or within an app. FN + F2 Decreases the brightness of the display panel in individual steps.
-
Page 55: Optical Disc Drive
Those toast notifications are enabled by default. You can disable them in the Function Key settings. To access it, click System Settings -> Function Key under TOSHIBA group in All apps. Windows special keys The keyboard provides two keys that have special functions in Windows, ®... -
Page 56: Using The Optical Disc Drive
Blu-ray™ Writer drive In addition to the above formats, Blu-ray™ Writer drive supports BD-ROM, BD-ROM DL, BD-R, BD-R DL, BD-RE and BD-RE DL. Using the optical disc drive The full-size drive provides high-performance execution of disc based programs. You can run either 12 cm (4.72") or 8 cm (3.15") discs without an adaptor. -
Page 57: Removing Discs
Lay the disc, label side up, in the disc tray. Figure 4-3 Inserting a disc 1. Laser lens When the disc tray is fully opened, the edge of the computer covers the disc tray slightly. Therefore, you must turn the disc at an angle when you place it in the disc tray. -
Page 58: Writable Discs
When the disc tray pops open slightly, wait a moment to make sure the disc has stopped spinning before pulling the disc tray fully open. The disc extends slightly over the sides of the disc tray so you can grasp it. Gently lift out the disc. Push the center of the disc tray to close it. -
Page 59: Important Message
This might cause you to either lose data or incur other damage to the drive or media. Disclaimer TOSHIBA does not assume responsibility for the following: Damage to any disc that might be caused by writing or rewriting with this product. -
Page 60: Before Writing Or Rewriting
Based on TOSHIBA limited compatibility testing, we suggest the following manufacturers of disc media, however, it must be noted that disc quality can affect write or rewrite success rates. Also be aware that in no event does TOSHIBA guarantee the operation, quality or performance of any disc. CD-R: TAIYO YUDEN CO., Ltd. -
Page 61: When Writing Or Rewriting
BD-RE: Panasonic Corporation BD-RE DL: Panasonic Corporation BD-R TL: TDK Corporation BD-RE TL: Panasonic Corporation Some types and formats of DVD-R DL and DVD+R DL discs might be unreadable. Disc created in DVD-R DL format4 (Layer Jump Recording) cannot be read. -
Page 62: Cyberlink Powerdvd For Toshiba
Close all other applications when using the CyberLink PowerDVD for TOSHIBA. Do not open any other applications or carry out any other operations during video playback. Playback might stop or not function properly in some situations. - Page 63 Display Devices & Audio If the video image is not displayed on an external display or television, stop the CyberLink PowerDVD for TOSHIBA, and change the screen resolution. To change the screen resolution, click Control Panel -> Appearance and Personalization -> Display -> Adjust resolution under Windows System group in All apps.
-
Page 64: Toshiba Blu-Ray Disc Player
CyberLink PowerDVD for TOSHIBA Help. Press the F1 key when CyberLink PowerDVD for TOSHIBA is launched. TOSHIBA Blu-ray Disc Player Please be aware of the following limitations when you use TOSHIBA Blu- ray Disc Player. Notes on Use This software can only be used on Windows operating system. - Page 65 Setting Tab). When you purchase Blu-ray™ Video, make sure it matches your drive, otherwise it will not play properly. To play back video on an external display or TV using TOSHIBA Blu- ray Disc Player, use output devices like external displays or TV that have HDCP supported HDMI port.
-
Page 66: 3D Playback On An External 3D Device
TOSHIBA Blu-ray Disc Player Manual. Use the following procedure to open TOSHIBA Blu-ray Disc Player Manual. Press the F1 key when TOSHIBA Blu-ray Disc Player is launched and click the Help button. 3D Playback on an External 3D Device 3D playback on an external 3D device feature is only provided with some models. - Page 67 The picture generated by 2Dto3D conversion function is not the same as a picture produced for 3D playback use. The 2Dto3D conversion function simply uses TOSHIBA's original algorithm to apply pseudo 3D effect to the 2D content. The Player is set by default in the 2D format. By pressing the 2Dto3D...
- Page 68 The protection of intellectual property rights is essential for TOSHIBA. In this respect, TOSHIBA underlines that the Player should not be used in a manner infringing such rights.
-
Page 69: Battery
The RTC battery of the computer is a lithium ion battery and must be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled, or disposed of. -
Page 70: Charging The Batteries
Refer to the enclosed Instruction Manual for Safety and Comfort for detailed precautions and handling instructions. Charge the battery pack only in an ambient temperature from 5 through 35 degrees Celsius. Otherwise, the electrolyte solution might leak, battery pack performance might deteriorate, and the battery life might be shortened. -
Page 71: Monitoring Battery Capacity
The battery is nearly completely discharged. In this instance, leave the AC adaptor connected for a few minutes and the battery should begin charging. The DC IN/Battery indicator might show a rapid decrease in battery operating time when you try to charge a battery under the following conditions: The battery has not been used for a long time. -
Page 72: Extending Battery Life
How often and for how long you use the Hard Disk Drive and external disk drives, for example, optical disc How much charge the battery contained to begin with How you use optional devices, such as a USB device, to which the battery supplies power Whether you enable Sleep Mode, which can conserve battery power if you are frequently turning the computer off and on... -
Page 73: Lan
The computer might have built-in support for Ethernet LAN (10 megabits per second, 10BASE-T), Fast Ethernet LAN (100 megabits per second, 100BASE-TX) or Gigabit Ethernet LAN (1000 megabits per second, 1000BASE-T). This section describes how to connect/disconnect to a LAN. Do not install or remove a memory module while Wake-up on LAN is enabled (only for models equipped with the memory module cover). -
Page 74: Additional Memory Module
When installing or removing a memory module, you must ensure that you do not touch any other internal areas of the computer. Use only memory modules approved by TOSHIBA. Do not try to install or remove a memory module under the following conditions. -
Page 75: Installing A Memory Module
Hold down the F2 key and then release this key one second after the computer is power on. The TOSHIBA Setup Utility will load. In the TOSHIBA Setup Utility screen, select Exit -> Disable Built-in Battery, and Power Off. Remove the AC adaptor, all cables, and peripherals connected to the computer. - Page 76 Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 30 degree angle before holding it down until the latches on either side snap into place. Figure 4-7 Seating the memory module 1.
-
Page 77: Removing A Memory Module
Hold down the F2 key and then release this key one second after the computer is power on. The TOSHIBA Setup Utility will load. In the TOSHIBA Setup Utility screen, select Exit -> Disable Built-in Battery, and Power Off. Remove the AC adaptor, all cables, and peripherals connected to the computer. -
Page 78: Memory Media
Grasp the module by its edges and remove it from the computer. If you use the computer for a long time, the memory modules and the circuits locating close to the memory modules will become hot. In this case, let them cool to room temperature before you replace them. Or you will get burnt if you touch any of them. - Page 79 Figure 4-10 Examples of memory media Secure Digital (SD) Card microSD card adaptor and microSD card MultiMediaCard (MMC) Points to note about the memory media card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
-
Page 80: Media Care
To format all areas of the memory card, including the protected area, you must obtain an appropriate application that applies the copy protection system. Media care Observe the following precautions when handling the card. Do not twist or bend cards. Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. -
Page 81: Removing Memory Media
Press the memory media gently to ensure a firm connection is made. The memory media will be partially out of the slot. Figure 4-11 Inserting memory media 1. Memory media slot 2. Memory media Product appearance depends on the model you purchased. Make sure that the memory media is oriented properly before you insert it. -
Page 82: External Display
External Display Your computer video capabilities can be enhanced with additional displays. External displays allow you to share your desktop or extend the desktop area. Connecting an external display Your computer comes with a built-in display, but you can also connect other external displays via available ports on the computer. -
Page 83: Wireless Display
Do not plug/unplug an HDMI device under the following conditions: The system is starting up. The system is shutting down. When you connect a television or external monitor to the HDMI port, the display output device is set to HDMI. When you unplug the HDMI cable and replug it, wait at least 5 seconds before you replug the HDMI cable again. -
Page 84: Changing The Display Settings
including TVs as extended screens wirelessly. With Wireless display, documents, streamed/local media contents, or other online contents can be shared wirelessly with others. To use Wireless display, either one of the following devices is required: A compatible external display with built-in support for Wireless display. An external display with HDMI port and a Wireless display adaptor. -
Page 85: Optional Toshiba Accessories
Figure 4-13 Security lock 1. Security lock slot 2. Security lock Optional TOSHIBA Accessories To make your computer even more powerful and convenient to use, you can add a number of options and accessories. For reference, the following list details some of the items that are available from your reseller or... - Page 86 On the Levels tab, move the Microphone slider to increase or decrease the microphone volume level. If you feel the microphone volume level is inadequate, move the Microphone Boost slider to a higher level. SmartAudio Your computer contains SmartAudio, a powerful program that allows you to configure your audio software to enhance and personalize your listening experience.
-
Page 87: Video Mode
Manufactured under license from DTS Licensing Limited. Video mode Video mode settings are configured via the Screen Resolution dialog. To open the Screen Resolution dialog, click Control Panel -> Appearance and Personalization -> Display -> Change display settings under Windows System group in All apps. If you are running some applications (for example a 3D application or video playback), you might see some disturbance, flickering, or frame dropping on your screen. -
Page 88: Chapter 5 Utilities And Advanced Usage
This utility allows you to set a password in order Utility to restrict access to the computer. To access this utility, click Password Utility under TOSHIBA group in All apps. TOSHIBA System This utility allows you to customize your Settings hardware settings according to the way you work with the computer and the peripherals you use. - Page 89 Disc™. It has an on-screen interface and functions. To start this utility, click TOSHIBA Blu- ray Disc Player under TOSHIBA group in All apps. For details on how to use TOSHIBA Blu- ray Disc Player, see the help file. TOSHIBA eco Utility This computer is equipped with "eco mode".
- Page 90 TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software updates or other alerts from TOSHIBA that are specific to your computer system and its programs. When enabled, this application periodically transmits to our servers a limited...
- Page 91 TOSHIBA group in All apps. For details on this utility, see the help file. Chroma Tune for Chroma Tune for TOSHIBA is a utility that allows TOSHIBA color setting of your computer. To access this utility, click Chroma Tune for TOSHIBA under Portrait Displays group in All apps.
-
Page 92: Special Features
To access the setup files of the drivers/utilities, click Applications and Drivers under TOSHIBA group in All apps. TOSHIBA Media Player by sMedio TrueLink+ app is not included in the setup files above but can be downloaded from Windows Store. - Page 93 HDD automatic power This feature automatically cuts off power to the hard disk drive when it is not accessed for a specified time, with power being restored when the hard disk drive is next accessed. This can be specified in the Power Options. System automatic This feature automatically shuts down the system Sleep/Hibernation...
-
Page 94: Toshiba Password Utility
In this instance, all unsaved data in memory will be lost. TOSHIBA Password Utility The TOSHIBA Password Utility provides two levels of password security: User and Supervisor. Passwords set by the TOSHIBA Password Utility function are different from the Windows password. User's Manual... -
Page 95: User Password
User Password To start the utility, click the following items under TOSHIBA group in All apps: Password Utility -> User Password User authentication might be required to validate user rights when using TOSHIBA Password Utility to delete or change passwords, and so on. -
Page 96: Supervisor Password
If you forget your HDD User Password, TOSHIBA will NOT be able to assist you, and your HDD will be rendered COMPLETELY and PERMANENTLY INOPERABLE. TOSHIBA will NOT be held responsible for any loss of any data, any loss of use or access to your HDD, or for any other losses to you or any other person or organization that result from the loss of access to your HDD. -
Page 97: Toshiba System Settings
To run TOSHIBA System Settings, click System Settings under TOSHIBA group in All apps. The TOSHIBA System Settings window contains a number of tabs to allow specific functions of the computer to be configured. In addition, there are also three buttons: OK, Cancel and Apply. -
Page 98: Usb Charge
Sleep Mode, Hibernation Mode, or shutdown state. To set USB Sleep and Charge feature, click System Settings -> Sleep and Charge under TOSHIBA group in All apps. Move the slider to enable or disable the Sleep and Charge function. - Page 99 When there is a current overflow of the external devices connected to the compatible ports, USB bus power (DC5V) supply might be stopped for safety reasons. When Sleep and Charge function is enabled, the USB Wakeup function might not work for compatible ports. In that case, if there is a USB port that does not have the Sleep and Charge function, attach the mouse or keyboard to it.
-
Page 100: Toshiba Media Player By Smedio Truelink
“System ON CDP Charge Mode” and “USB Sleep and Charge function”. TOSHIBA Media Player by sMedio TrueLink+ Be aware of the following limitations when you use the TOSHIBA Media Player by sMedio TrueLink+: Notes on use TOSHIBA Media Player by sMedio TrueLink+ is a multimedia player which can be used to play back video, music, and photo. - Page 101 The screen saver is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos. The computer will not enter Sleep and Hibernation mode automatically, while TOSHIBA Media Player is running. The display automatic power off function is disabled while TOSHIBA Media Player is playing a video file or slideshows of photos.
-
Page 102: Toshiba Pc Health Monitor
You can disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. -
Page 103: Toshiba Product Improvement Program
Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be opened by clicking PC Health Monitor under TOSHIBA group in All apps. The TOSHIBA PC Health Monitor main screen is displayed. This utility might be disabled by default on your computer. You can enable it by clicking Please click here to enable TOSHIBA PC Health Monitor. -
Page 104: Toshiba Setup Utility
TOSHIBA obligations under its standard limited warranty. TOSHIBA standard limited warranty terms and limitations apply. TOSHIBA Setup Utility TOSHIBA Setup Utility is a BIOS setup utility that provides you a menu- based user interface so that you can easily view and change BIOS settings. -
Page 105: Troubleshooting
In reality many problems can be solved simply, but a few might require help from TOSHIBA Support. If you find you need to consult others, be prepared to describe the problem in as much detail as possible. -
Page 106: Analyzing The Problem
Always try to make detailed notes of your observations and keep them in a permanent error log - this helps you to describe your problems to TOSHIBA Support. In addition, if a problem recurs, the log you have made helps to identify the problem faster. -
Page 107: If Something Goes Wrong
Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure that the device or software can be used with your computer. Use of incompatible devices might cause injury or might damage your computer. -
Page 108: Hardware And System Checklist
By holding down one of the following keys during startup, your computer can load the following advanced options. Advanced option TOSHIBA Setup Utility Boot Menu 0 (zero) Recovery options If your computer starts to load the Operating System instead of desired advanced options, do the following: Click Start ->... -
Page 109: Overheating Power Down
If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact TOSHIBA Support. AC power If you have trouble turning on the computer with the AC adaptor connected, check the status of the DC IN/Battery indicator. -
Page 110: Internal Display Panel
The lasting time of the Real-Time Clock (RTC) has and system date/ run out. You must set the date and time in the time are lost. TOSHIBA Setup Utility by using the following steps: Launch the TOSHIBA Setup Utility. Refer to TOSHIBA Setup Utility section for further information. -
Page 111: Hard Disk Drive
- if so remove it and try to start the Drive computer again. If this has no effect, check the Boot Priority Options setting within the TOSHIBA System Settings. Slow performance The files on the Hard Disk Drive might be fragmented. -
Page 112: Memory Media Card
If you are still unable to resolve the problem, contact TOSHIBA Support. Pointing device If you are using a USB mouse, you should also refer to both the mouse section and the documentation supplied with your mouse. -
Page 113: Touch Pad
Touch Pad is either To access it, click Control Panel -> Hardware too sensitive or not and Sound -> Mouse under Windows System sensitive enough. group in All apps. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual... -
Page 114: Usb Mouse
If you are still unable to resolve the problem, contact TOSHIBA Support. USB device In addition to the information in this section, also refer to the documentation supplied with your USB device. - Page 115 Sleep and Charge Enable the Sleep and Charge function in the function. TOSHIBA System Settings. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply might be stopped for safety reasons.
- Page 116 Refer to Sound System and Video mode for further information. Volume cannot be adjusted during Windows start up or shut down. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-12...
-
Page 117: External Monitor
Display error occurs Check that the cable connecting the external monitor to the computer is firmly attached. If you are still unable to resolve the problem, contact TOSHIBA Support. Problem Procedure Cannot access LAN Check for a firm cable connection between the LAN jack and the LAN hub. -
Page 118: Wireless Lan
Bluetooth device is turned Check to ensure that no optional Bluetooth Adaptor is installed in the computer. The built-in Bluetooth hardware cannot operate simultaneously with another Bluetooth controller. If you are still unable to resolve the problem, contact TOSHIBA Support. User's Manual 6-14... -
Page 119: Toshiba Support
TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you might need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience might be related to software or the operating system so it is important that you investigate other sources of assistance first. -
Page 120: Appendix Specifications
Chapter 7 Appendix Specifications This section summarizes the technical specifications of the computer. Physical Dimensions The following physical dimensions do not include parts that extend beyond the main body. The physical dimensions vary depending on the model you purchased. Size Approximately 380 (w) x 259.9 (d) x 22.5/22.5 (h) millimeters Approximately 380 (w) x 259.9 (d) x 23.5/23.5 (h) -
Page 121: Ac Power Cord And Connectors
Power Requirements AC adaptor 100-240V AC 50 Hz or 60 Hz (cycles per second) Computer 19V DC AC Power Cord and Connectors The AC input plug of the power cord must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. -
Page 122: Information For Wireless Devices
For the United States and Canada, two-pin plug configuration must be a 2-15P (250 V) or 1-15P (125 V) and three-pin plug configuration must be 6-15P (250 V) or 5-15P (125 V) as designated in the U.S. National Electrical code handbook and the Canadian Electrical Code Part II. The following illustrations show the plug shapes for the U.S.A. -
Page 123: Wireless Devices And Your Health
Because Wireless products operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes that Wireless products are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature. -
Page 124: Card Specifications
If this occurs, the outsider might illegally access your system, eavesdrop, or cause the loss or destruction of stored data. TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Card Specifications Compatibility IEEE 802.11 Standard for Wireless LANs... -
Page 125: Bluetooth Wireless Technology
Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4 GHz and 5 GHz band, local radio regulations might impose a number of limitations to the use of wireless communication equipment. -
Page 126: Worldwide Operation
Worldwide operation The Bluetooth radio transmitter and receiver operate in the 2.4 GHz band, which is license-free and compatible with radio systems in most countries in the world. Radio links You can easily establish links between two or more devices, with these links being maintained even if the devices are not within a line-of-sight of each other. - Page 127 Restrictions for Use of 5150-5350MHz Frequencies in Europe Italy: For private use, a general authorization is required if WAS/ RLAN’s are used outside own premises. Luxembourg: Implemented General authorization required for network and service supply. Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas,...
- Page 128 Russian Limited e.i.r.p 100mW. Permitted to use Federation: only for indoor applications, closed industrial and warehouse areas, and on board aircraft. Permitted to use for local networks of aircraft crew service communications on board aircraft in area of the airport and at all stages of flight.
- Page 129 The term “IC” before the equipment certification number only signifies that the Industry Canada technical specifications were met. USA-Federal Communications Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 130 If this equipment causes RF interference to other radio stations, promptly change the frequency being used, change the location of use, or turn off the source of emissions. Contact an authorized TOSHIBA service provider if you have problems with interference caused by this product to Other Radio Stations.
-
Page 131: Device Authorization
(1) (2) (3) 2.4: This equipment uses a frequency of 2.4 GHz. FH: This equipment uses FH-SS modulation. 1: The interference range of this equipment is less than 10m. : This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz. It is impossible to avoid the band of mobile object identification systems. -
Page 132: Nfc Regulatory Information
This equipment is approved to the radio standard by the countries/regions in the following table. If you use this equipment in the countries/regions which are not listed in the following table, contact TOSHIBA Support. As of June 2015 Austria Belgium... -
Page 133: Legal Footnotes
Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. - Page 134 For optimum performance, use your computer product only under recommended conditions. Read additional restrictions in your product documentation. Contact TOSHIBA technical service and support, refer to TOSHIBA support section for more information.
-
Page 135: Battery Life
Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery might not charge while computer is consuming full power. -
Page 136: Glossary
Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach might vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed is lower than the theoretical maximum speed. - Page 137 DVD+R DL: Digital Versatile Disc Recordable Double Layer FAT: File Allocation Table FCC: Federal Communications Commission FHD: Full High Definition gigabyte GBps: gigabytes per second High Definition HD+: High Definition Plus HDD: Hard Disk Drive HDMI: High-definition Multimedia Interface HDMI CEC: High-definition Multimedia Interface Consumer Electronics Control HTML:...
- Page 138 Secure Digital SDHC: Secure Digital High Capacity SDXC: Secure Digital Extended Capacity SDRAM: Synchronous Dynamic Random Access Memory SSD: Solid-State Drive TFT: Thin-film Transistor URL: Uniform Resource Locator USB: Universal Serial Bus WAN: Wide Area Network WQHD: Wide Quad High Definition WWW: World Wide Web User's Manual...
-
Page 139: Index
Index AC adaptor additional 4-35 Equipment checklist 2-1 connecting 2-2 DC IN 19V jack 3-2 External monitor problems 6-13 ASCII characters 4-5 Graphics Processing Unit Battery 3-11 extending life 4-22 monitoring capacity 4-21 real-time clock 4-19 save mode 5-6 Hard disk drive automatic power off 5-6 Bluetooth 7-6 HDMI out port 3-4... - Page 140 6-5 inserting 4-30 Power 6-4 removing 4-31 Real-Time Clock 6-6 Sound system 6-12 TOSHIBA support 6-15 Memory media slot 4-28 Touch Pad 6-9 USB device 6-10 Moving the computer 1-17 USB mouse 6-10 MultiMediaCard removing 4-31...
- Page 141 USB device problems 6-10 Video mode 4-37 Video RAM 3-10 Web Camera 3-7 Wireless communication 7-4 User's Manual Index-3...