Welcome to Toshiba • Thank you for purchasing this Toshiba LED TV. This manual will help you use the exciting features of your new TV. • Instructions in this manual are based on using the remote control. • You also can use the controls on the TV if they have the same name as those referred to on the remote control.
• Place the TV on a sturdy surface that has a suffi cient thickness and screw the unit on the surface securely by using the mounting screw and the fall-prevention screw hole. TV Side 84L9450 Series 50L9450 Series / 65L9450 Series Mounting screws Mounting screws Hooks Hooks Screw holes...
Page 4
• Never place the TV on tall furniture (for Fall-prevention bands example, cupboards or bookcases) without 50L9450 Series / 65L9450 Series anchoring both the furniture and the TV to a suitable support. When using one fall-prevention band •...
Page 5
• Never place the TV in a closet, bookcase or of 4 people are required. other similar area where the ventilation is • For 50L9450 Series / 65L9450 Series: For safe poor. handling, a minimum of 2 people are required.
Page 6
Introduction / Getting started • For 50L9450 Series / 65L9450 Series: • The TV is not completely disconnected from (1) Carefully lay the front of the unit face down the power supply line, as minute current is consumed even when the ! Power switch is on a fl at, cushioned surface such as a quilt or blanket.
Page 7
1) About LCD screen owner’s manual. • If you have the LCD screen facing to the sun, • Toshiba is not liable for any damage caused by the LCD screen will be damaged. Be aware of misuse or malfunction through simultaneous use locating the TV close to a window or outdoors.
Insert two LR6 (AA) batteries matching the –/+ Your Toshiba dealer or service personnel can best polarities of the battery to the –/+ marks inside the advise you on which aerial to use in your area.
Introduction / Getting started Eff ective range 84L9450 Series 50L9450 Series / 65L9450 Series within 5 m within 5 m Connecting the AC power cord to your TV (for 84L9450 Series) Attach the supplied ferrite core at the TV end of the AC power cord.
• For the use of each control, see the pages in brackets. Left side view (common) TV front view 84L9450 Series 50L9450 Series / 65L9450 Series USB 1-3 (input terminals) — Insert your USB storage device (photo, video and music) (- page 57).
Page 11
* Cable holder Cable holder* You can use the cable holder to hold the aerial cable, video and audio cables etc. Never grasp the holder when moving the TV. 50L9450 Series / 65L9450 Series: COMPONENT/ VIDEO INPUT VIDEO VIDEO DIGITAL AUDIO...
Introduction / Getting started Learning about the remote control TV remote control Power on/Standby Input source selection To select ATV or DTV To select the Intelligent Scene Optimiser mode Picture Mode Sound Mode Picture Size Audio Source Filtering Picture still 10 Number buttons (0-9) 11 Switch the Audio Description On/Off 12 To return to the previous programme...
Page 13
Introduction / Getting started Easy remote control Using the pointing key Move the pointer Tilt the pointing key to move the screen pointer in the tilted direction. Pointing key Select/Confi rm Press the pointing key to confi rm the selection. Hold and move Press, hold, and then tilt the pointing key to hold and move the selected item.
Introduction / Getting started When the Android setup is complete, the Tuning the TV for the fi rst time Country setup screen appears. Before switching on the TV, put your decoder and Country media recorder to standby, if they are connected, and ensure that the aerial is connected.
Page 15
Introduction / Getting started Press ,, or to select the Primary Press OK to display the Auto Tuning setup Subtitle Language, Secondary Subtitle menu. Language, Primary Audio Language or Secondary audio Language. Auto Tuning Tuning Mode DTV and ATV Quick Setup Scan Type Quick Scan...
Unknown Press 1 on the Easy remote control, and the ! power indicator lights up in green. The TOSHIBA logo is displayed, and then the home screen appears. Using the TV itself • The actual screen may diff er in appearance.
Using the TV’s features Use the TV remote control while watching TV broadcasts (or external input). Learning about the menu system We suggest you familiarize yourself with the display charts before using the menu system: • Press MENU to display menu, then press or to select main menu headings. •...
Using the TV’s features Using the Quick Menu Watching TV programmes Quick Menu helps you access some options quickly, Selecting the country such as Picture Mode, Media Player etc. Press QUICK to display the Quick Menu and use You can select a country. If the Country setting is or ...
Using the TV’s features Auto Signal Booster: Programming channels into the TV’s channel Press or to select On or Off . If the receiving memory signal is weak/strong and the picture is noisy, the picture may be improved when using this •...
Page 20
Using the TV’s features C. Colour System ( - page 70) 2) Repeat step 1) to enter the rest of the characters. If you would like a blank space A : Automatic (factory set), P : PAL, in the label name, you must choose a blank S : SECAM, N4 : NTSC 4.43 (MHz), space from the list of characters.
Page 21
Using the TV’s features DTV Manual Tuning DTV Settings NOTE: Channels The content of this menu varies depending on the DTV The channel order may be changed to suit your input that is currently selected. personal preference. This feature is available for service engineers or can From the SETUP menu, press ...
Using the TV’s features Picture adjustment Channels • Most of the picture controls and functions are Line No. 1/10 available. However, features not available will be Pos. Name Type greyed out. ABC ONE ABC TWO Selecting the Picture Size ABC THREE ABC 24 ABCi Press...
Page 23
Using the TV’s features Cinema PC Wide When watching “all sides panel format” fi lms/video Use this setting for PC connected via HDMI or RGB/ tapes, this setting will eliminate or reduce the black PC terminal when receiving PC signal format. This bars on all the sides of the screen by zooming in and setting will display the image without picture selecting the image without distortion.
Page 24
Using the TV’s features Ultra HD Normal Using the Intelligent Scene Optimiser This setting will show the whole Ultra HD You can easily select the best picture and sound picture (4096 pixels x 2160 pixels) with the same mode for what you are watching. proportions as the original image.The picture will •...
Page 25
Using the TV’s features Press or to select Picture Mode. Adjusting the Colour Temperature Colour Temperature increases the warmth or Picture Settings coolness of the picture by setting the red, green or Picture Mode Standard blue tint. Backlight Contrast From the Picture Settings menu, press ...
Page 26
Using the TV’s features Using the Fine Texture Restoration Using the Mosquito Noise Reduction This feature allows you to adjust the fi ne texture of This feature reduces the amount of mosquito noise the picture. that appears near outlines. From the Picture Settings menu, press or From the Advanced Picture Settings menu, press ...
Page 27
Using the TV’s features Using the 1080p Pure Direct Mode Resetting the Picture Settings When Intelligent Scene Optimiser is set to Game This feature resets the Picture Settings to the or PC, this setting can be changed to prioritise factory settings. picture quality.
Using the TV’s features Press or to adjust the settings as required. Stereo and Bilingual transmissions (for ATV programmes) Saturation Brightness Setting the MTS (Multi-channel TV Sound) Auto mode NOTE: If you select 3D Colour Management Off mode, this The MTS Auto mode automatically recognize stereo/ mode is not available.
Using the TV’s features Selecting the stereo programmes Sound adjustment When a stereo programme is received, Adjusting the sound balance d Stereo appears. From the SOUND menu, press or to select the Balance. Stereo ABCD Press or to adjust the settings as desired. Using the Sound Mode Press s to select the stereo/monaural mode.
Page 30
Using the TV’s features Using the Power Bass Booster Using the Dynamic Range Control Power Bass Booster helps to create rich bass. This feature allows control of compression for Dolby Digital and Dolby Digital Plus. From the Advanced Sound Settings menu, press ...
Using the TV’s features Audio Description Edit Timer 6:00 Wed, 10 Apr 2014 Audio Description is an additional narrative sound Channel 0000ABC2 Date Wed, 10 Apr 2013 track for visually impaired individuals to understand Start Time 7:00 and enjoy the story line more fully. The letters Repeat Once AD will be displayed in the channel banner when...
Page 32
Using the TV’s features When all the details have been entered, select Using the Auto Format Done and press OK to start the timer. When Auto Format is On and the TV receives a To cancel the On Timer digital broadcast or a true HDMI signal picture, it will automatically be displayed in the appropriate From the On Timer menu, press ...
Using the TV’s features Prioritise OSD Quality : Setting No Signal Power Down The picture from HDMI devices is displayed The TV will automatically turn itself off after 15 at the standard quality. The quality of the minutes when no signal is detected. You can change menu display is as normal (the background is the setting to Off for the following purposes: translucent) while watching the picture from an...
Page 34
Using the TV’s features Genre icons To display More Information One of the following Genre icons is displayed, Press QUICK to open the Quick Menu. depending on the type of programme being Press to select More Information and press broadcast.
Using the TV’s features Press and to select PIN Setting and press Using the Guide Button Operation DTV Settings or Changes the channel. Channels Subtitle and Audio or Selects a programme. PIN Setting Parental Control Displays the next or previous Local Time Setting PU / Pu...
Using the TV’s features Repeat steps 1 through 4 for other channels. Digital settings – Channel Options Press EXIT. Selecting favourite channels NOTE: Skipped channels cannot be selected by Pu or PU Favourite Channels creates a list of the digital but still be accessed by direct number entry (when channels that are watched most.
Using the TV’s features Press or to select Primary Subtitle Signal Booster Language or Secondary Subtitle Language and press or to select an option. Set the DTV Signal Booster. From the DTV Settings menu, press or to The SUBTITLE button can be used to select subtitle on or off for the current channel only and to select select Signal Booster and press OK.
Input Label APP SW Version.. EXT 1 EXT 2 System Information HDMI 1 HDMI 2 TOSHIBA 2014 HDMI 3 ID : XX Boot Code Version: XXXX.XXXX.XXXX APP SW Version: XXXXXX WEAK AVERAGE STRONG Press or to select the item you want to...
Using the TV’s features Over-the-air Upgrade Resetting the TV • The Over-the-air Upgrade function is used when Reset TV will reset all TV settings, including stored a Software Upgrade is required for the TV in the channels, to their original factory values. future.
Page 40
Pressing TEXT once will bring up the teletext screen. system(s), see the broadcast teletext index page or Press again to superimpose the teletext over a consult your local Toshiba dealer. normal broadcast picture. Press again to return Using List mode to normal TV mode.
Page 41
Using the TV’s features You may view other pages by simply entering To select the time display: the 3-digit page number – but NEVER press OK If you press while watching a normal TV or you will lose the favorite already stored. broadcast, you will see a time display from the broadcaster.
Using the TV’s features Connecting an audio system Back connections You can enjoy high quality dynamic sound by Connection example connecting the TV to an audio system. NOTE: TV back view • DO NOT connect the DIGITAL AUDIO output terminal to the AC-3 RF input of a Dolby Digital COMPONENT/ Receiver with a built-in Dolby Digital decoder.
Page 43
Using the TV’s features • HDMI: High-Defi nition Multimedia Interface Connecting an amplifi er equipped with a digital audio • HDCP: High-bandwidth Digital Content Protection (optical) input • CEA-861-D compliance covers the transmission of uncompressed digital video with high-bandwidth Amplifier equipped with digital content protection, which is being digital audio input standardized for reception of high-defi nition...
Using the TV’s features Connecting a DVI device Setting the HDMI 1 Audio mode You can select sound of an HDMI or DVI device One HDMI (type A connector)-to-DVI adapter cable connected to the HDMI input terminals from three and audio cables. modes: HDMI (type A connector)-to-DVI adapter cable Auto, Digital or Analogue.
Using the TV’s features NOTE: Signal names for mini D-sub 15 pin connector • Some PC models cannot be connected to this TV. Pin assignment for RGB/PC terminal • If connecting a certain PC model that signal is particular, the PC signal may not be detected correctly.
Using the TV’s features Adjusting the Clock Phase of the picture Using the Easy remote control to operate the If the Clock Phase, which synchronize the PC signal and LCD display, is not optimized, the picture will The following TV operations can be performed blur.
A TV window is located to the left of the desktop area on the home screen. • When purchased, icons such as the TOSHIBA Information and Browser icon are located on the desktop area of the home screen. The desktop areas can be customized.
Page 48
Using the Android features The desktop area of the home screen Moving between desktop areas The TV window and fi xed icons are located on the Select the screen slide button, and press the desktop area of the home screen. pointing key.
Select the Settings icon and press the pointing key If a preinstalled application other than TV to display the settings screen. Application, Media Player, Screen Mirroring, and TOSHIBA Service Station is updated, performance Logging out cannot be guaranteed. Select the User Name area, and press the Starting an application pointing key.
Using the Android features Customizing the desktop Customizing the Dock bar You can locate or move application shortcut icons Placing shortcut icons on the Dock bar or widgets on the desktop area to customize the desktop. Up to 7 shortcuts can be placed in the dock bar. The shortcut icons or widgets can be removed.
Using the Screen Mirroring function Connecting a network You can view the screen of your tablet, smartphone The LAN port allows your Toshiba TV to connect to or PC on the TV. your home network. • This function is available when connected via NOTE: wireless LAN.
Network name, Authentication, Encryption and guidelines found in radio frequency safety standards Security Key all to be inputted manually. and recommendations, TOSHIBA believes Wireless LAN is safe for use by consumers. These standards Easy Setup using PBC (Push Button Confi guration)
Network SSID and Security. copyright infringement of right holder's rights. Toshiba asks you to respect the intellectual property Select Save, and press the pointing key. rights of third parties. 506584L9450Series_En.indd 53 506584L9450Series_En.indd 53...
Page 54
Using the Android features • The eff ect of Audio Source Filtering depends on the Apps contents. Check the applications. • If the content is mono, it may not have enough eff ect. Select Apps and then press the pointing key. The •...
Page 55
Using the Android features Backup & reset Automatic Power Down Confi gure the backup and reset settings. Set Automatic Power Down. To display the setup screen, select Backup & reset The TV will automatically turn itself off (standby) and then press the pointing key. after approximately 4 hours, if you do not operate the control buttons on the remote control or on the Set them up if necessary.
Using the Android features Updating the system Use TOSHIBA Service Station to update the system. Display the APPS screen (- page 49). Select and start TOSHIBA Service Station. Follow the on-screen instructions. Using the TV remote control to operate The following buttons on the TV remote control can be used to operate Android features, when the Easy remote control cannot be used.
Date : xxxx xxx xxxxx xxxxx from copyright owners to download or use xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx Size : 1920 x 1080 copyrighted content. TOSHIBA cannot and does not grant such permission. xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx 506584L9450Series_En.indd 57 506584L9450Series_En.indd 57...
Using the Media Player Starting Media Player from the home screen Viewing photo fi les Select , and press the pointing key. File Compatibility See page 66. The top screen of the Media Player appears. Using the TV remote control to operate There are three types of viewing modes.
Page 59
Using the Media Player Slide Show Using the Easy remote control to operate This view allows you to watch a slide show of Multi View your photos. In this mode, only fi les located in the selected directory will be played. Photos To start slideshow, press OK in the Single View /xxxxxxxxxxxxxxx/...
Using the Media Player Z within 2 seconds after the content starts to Viewing video fi les return to the beginning of the previous content. • Press to skip to the next fi le, or to return to File Compatibility the previous fi le.
Page 61
Using the Media Player To close the Movie Viewer To playback DivX Plus HD content: • To play in fast reverse or fast forward directions, Press EXIT. press CC or cc during playback. Each time you press CC or cc, the playback speed will change. The top screen of the Media Player appears.
Using the Media Player Using the Easy remote control to operate Playing music fi les List View File Compatibility See page 66. Videos /USB/ Total Time 5/999 Using the TV remote control to operate xxxxxxxx xxxx 00:20:00 You can listen to music from a List View of available 03:00:00 xxxx.ccc.abc 03:00:00...
Page 63
Using the Media Player To set the repeat mode: Using the Easy remote control to operate Press QUICK to open the Quick Menu. List View Press or to select Repeat. Music Press or to select Off , All or 1. /USB/ Total Time 5/999...
Using the HDMI CEC Function This feature uses CEC (Consumer Electronics HDMI CEC Control connection Controls) technology and allows the control of HDMI CEC compatible devices from the TV remote control Before controlling the device(s): via HDMI connection. • After completing the below connections, set the NOTE: HDMI CEC menu as you desire.
Page 65
Using the HDMI CEC Function To set the HDMI CEC Control Setup Set in the Android feature Settings. Select the Settings icon on the home screen, and press the pointing key. The Settings screen appears. Select HDMI CEC, and press the pointing key. Confi gure the displayed settings.
Reference section APPENDIX Media Player Supported Formats Media Media File Video/Audio codec Note Player Format Extention JPEG .jpg JPEG Data compatibility: JPEG Exif ver 2.1 .jpeg Maximum number of fi les: 4096 per folder • Some fi les may not be played. .png Photos .bmp...
Page 67
Certain HDMI formats or still images exceeding “Ultra HD” resolution may not be supported. May require purchase of additional external hardware, software and/or services. Toshiba makes no representation or warranties about any future “Ultra HD” content, standards or services.
Page 68
Reference section Signal Class Table C mode RF Frequency [MHz] RF Frequency [MHz] RF Frequency [MHz] 663.25 161.25 44.25 671.25 168.25 48.25 679.25 231.25 55.25 687.25 238.25 62.25 695.25 245.25 175.25 703.25 252.25 182.25 711.25 259.25 189.25 719.25 266.25 196.25 727.25 273.25 203.25...
Reference section Troubleshooting Some pixels of the screen do not light up • The LCD display panel is manufactured Before calling a service technician, please check the using an extremely high level of precision following table for a possible cause of the symptom technology, however, sometimes some pixels and some solutions.
Reference section Broadcast system Specifi cations LED TV Broadcast transmission systems of each country or region Model 50L9450 Series, 65L9450 Series, 84L9450 Series Asia M.E. Power source 110V-240V AC, 50/60Hz Country or region Colour Sound Power consumption Bahrain, Kuwait, Israel, Oman, 50"...
Page 71
(These signal formats are converted to match Supplied accessories the number of pixels of the LCD panel.) 50L9450 Series / 65L9450 Series Standard VIDEO INPUT terminals (Colour System) Owner’s manual (1), Remote control (2), PAL, SECAM, NTSC 3.58/4.43 Batteries (2), Clip (1) (- page 3), Screw (2)
Page 72
Reference section Trademark Information • THIS PRODUCT IS LICENSED UNDER THE MPEG- 4 VISUAL PATENT PORTFOLIO LICENSE FOR • The terms HDMI and HDMI High-Defi nition THE PERSONAL AND NON COMMERCIAL USE Multimedia Interface, and the HDMI Logo are OF A CONSUMER FOR (i) ENCODING VIDEO trademarks or registered trademarks of HDMI IN COMPLIANCE WITH THE MPEG-4 VISUAL Licensing LLC in the United States and other...
Page 73
WITH THOSE SEPARATE TERMS WILL CONTINUE TO thereof will remain the exclusive property of BE APPLICABLE. NOTWITHSTANDING ANYTHING TO Toshiba and/or its licensors, and you will not by THE CONTRARY IN THE SEPARATE TERMS PROVIDED this EULA acquire any rights to the Software or...
Page 74
REPRESENTATIVE SHALL CREATE A WARRANTY and amounts paid in settlement of third party OR IN ANY WAY INCREASE THE SCOPE OF or government claims, incurred by TOSHIBA as a THIS WARRANTY. SOME JURISDICTIONS DO result of or in any way arising from such use.
Page 75
11. No Waiver. No waiver of any breach of any entire agreement and understanding between provision of this EULA shall constitute a waiver you and TOSHIBA as to the subject matter of any prior, concurrent or subsequent breach of hereof and supersedes all prior agreements,...