Table of Contents
Advertisement
No. Component
Inverter
5) Remove the terminal cover of the compressor,
⑤
assembly
and disconnect the compressor leads from the
(continued)
compressor.
WARNING
The fast-on terminals of the compressor
lead wires may become loose when they
are disconnected. When reconnecting them,
crimp them slightly with radio pliers or the
like and ensure they are not loose before
reinsertion. The fast-on terminals could
overheat and cause a fire if loose.
6) Remove the screws of the inverter assembly
and inverter fixing plate (lower).
(M4×10, 1 )
7) Lift up on the inverter assembly and move it
forward and out.
●Remove the inverter assembly.
Procedure
Inverter assembly
Inverter assembly
156
Remarks
White
White
Red
Red
Put on the
Put on the
sleeve .
sleeve.
Compressor leads
Compressor leads
Notes on Compressor Leads
Notes on Compressor Leads
• Connect each compressor lead wire to its
• Connect each compressor lead wire to its
designated terminal.
designated terminal.
• Do not press the fast-on terminals twice.
• Do not press the fast-on terminals twice.
• After disconnecting the fast-on terminals that
• After disconnecting the fast-on terminals that
have been inserted once, replace the
have been inserted once, replace the
compressor leads.
compressor leads.
• Make sure to keep the exposed compressor
• Make sure to keep the exposed compressor
lead wires straight.
lead wires straight.
• Be careful not to apply excess stress to the
• Be careful not to apply excess stress to the
terminals and lead wires.
terminals and lead wires.
• Attach the terminal cover after passing the
• Attach the terminal cover after passing the
lead wires through the bushing. At this time, be
lead wires through the bushing. At this time, be
careful not to let the lead wires get caught in
careful not to let the lead wires get caught in
the gap with the terminal cover.
the gap with the terminal cover.
Thermostat
Thermostat
Black
Black
Screw (1 position)
Screw (1 position)
- Quick Links:
- Service Manual
- Outdoor Unit
- Outdoor Unit
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
