Table of Contents
Advertisement
84
Setting up your TV
No Signal Power Down
Setting the sleep timer
You can set the sleep timer to turn off the TV after a set length of
time (maximum of 12 hours).
To set the sleep timer using the remote control:
1
Press the SLEEP button on the remote control to set the length
of time until the TV turns off.
2
Repeatedly press the SLEEP button to increase the time in
10-minute increments, or press the ▲/▼(arrow) buttons to
increase or decrease the time in 10-minute increments, to a
maximum of 12 hours.
To set the sleep timer using the on-screen menus:
1
In Timers menu, highlight Sleep Timer, and then press the
ENTER button.
2
Press the Number buttons to enter the length of time
(maximum of 12 hours) and then press the ENTER button. Or
press the ▲/▼(arrow) buttons to increase or decrease in
10-minute increments (maximum of 12 hours).
To display the time remaining until the TV turns off, press the
SLEEP button.
To cancel the sleep timer, repeatedly press SLEEP until it is set to 0
minutes.
No Signal Power Down
The TV will automatically turn itself off after 15 minutes when no
signal is detected. You can change the setting to Off for the
following purposes:
Low signal strength of analog channel (no signal detection)
v
Only Audio L/R is connected to external input to listen to music
v
through the TV speakers.
To change the no signal power down setting:
1
From the Options menu, highlight Power Management, and
then press the ENTER button.
2
Highlight No Signal Power Down, and then press the ENTER
button.
3
Press the ▲/▼(arrow) buttons to highlight the item you want
to change, and press the ◄/►(arrow) buttons to select On or
Off.
If a power failure occurs, the sleep timer setting may be cleared.
Hide quick links:
Advertisement
Table of Contents
