Some of display mode might not be supported depending on the external
monitor which you use.
Displaying movies on a TV or CRT
This section describes how to set up your system to display movies
simultaneously on your computer's LCD and on an external TV or CRT
monitor.
To connect a television, follow the steps below.
1. Turn the computer off.
2. Use a video cable (not supplied) to connect the television to the video
out port.
3. Turn the television or CRT on.
4. Turn the computer on.
You can use the hotkeys Fn + F5 to change the display device. Refer to
Chapter 6, The Keyboard.
If a television is connected to the computer, set the TV type in Display
Properties. Follow the steps below, based on the configuration of your
computer:
B-2
Display Modes
Satellite A210/Satellite Pro A210