Table of Contents
Advertisement
Connections
Connecting to Optional Equipment
You can enjoy high quality dynamic sounds by connecting the DVD video player to
optional audio equipment.
• For connection to your TV, see "Connecting to a TV"
.
20
19
• For details of output sound, see
• This section uses the following reference marks.
: Front speaker
: Rear speaker
: Sub woofer
: Center speaker
: Signal flow
Notes
• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack
of the DVD video player to the AC-3 RF input of a Dolby
Digital Receiver. This input on your A/V Receiver is reserved
for Laserdisc use only and is incompatible with the COAXIAL
DIGITAL AUDIO OUT jack of the DVD video player.
• Connect the COAXIAL DIGITAL AUDIO OUT jack of the
DVD video player to the "DIGITAL (COAXIAL)" input of a
Receiver or Processor.
• Refer to the owner's manual of the connected equipment
as well.
• When you connect the DVD video player to other equipment,
be sure to turn off the power and unplug all of the equipment
from the wall outlet before making any connections.
• The output sound of the DVD video player has a wide
dynamic range. Be sure to adjust the receiver's volume to a
moderate listening level. Otherwise, the speakers may be
damaged by a sudden high volume sound.
• Turn off the amplifier before you connect or disconnect the
DVD video player's power cord. If you leave the amplifier
power on, the speakers may be damaged.
22
18
.
43
Warning
• When you are connecting (via the COAXIAL DIGITAL
AUDIO OUT jack) an AV decoder that does not have Dolby
Digital, Digital Theater Systems (DTS) or MPEG2
decoding function, be sure to set "Digital Output" to "PCM"
from the on-screen displays
sound may damage your hearing as well as the speakers.
• When playing DTS-encoded discs (DVD Video discs and
audio CDs), excessive noise may be output from the
analog audio output jacks. To avoid possible damage to
the audio system, you should take proper precautions
when the analog audio output jacks of the DVD video
player are connected to an amplification system. To enjoy
DTS Digital Surround™ playback, an external 5.1 channel
DTS Digital Surround™ decoder system must be
connected to the COAXIAL DIGITAL AUDIO OUT jack of
the DVD video player.
. Otherwise, high volume
61
Hide quick links:
Advertisement
Table of Contents
