Table of Contents
Advertisement
Operation Manual / TPS44-F.. - TPS61-F..
7 Removal and installation / 7.4 Installing the turbocharger
7.4 Installing the turbocharger
© Copyright 2020 . All rights reserved.
Loosen the fixing screws (D) on the bearing casing.
u
Lift the turbocharger from the engine and put it down.
u
Cover oil connections.
u
Remove covers from oil connections.
u
Visually inspect O-ring gaskets of oil supply and drain pipe (O-ring
u
gaskets for engine are not included in the scope of delivery of ABB).
**) When the turbocharger is mounted on the engine support, the bolt
threads and screw heads must be lightly oiled (assumed friction coeffi-
cient µ = 0.12 for tightening torque)
Strength class in accordance with DIN/ISO 898: 10.9/12.9
Product
Through hole in
bearing casing
TPS44
17 mm
TPS48
17 mm
TPS52
21 mm
TPS57
21 mm
TPS61
25 mm
Attach lifting gear to bearing casing.
u
If a gas outlet manifold is provided, sling lifting gear around it addi-
u
tionally or fasten it to lifting gear using a swivel lifting eye (C) (see
also section Transport / Weights).
Lift turbocharger, place on bracket and align.
u
Tighten fixing screws (D) to the bearing casing in accordance with the
u
table above.
HZTL2412_EN
Thread size
Tightening torque
M16
M16
M20
M20
M24
Rev.G
230 Nm
230 Nm
455 Nm
455 Nm
780 Nm
March 2020
Advertisement
Table of Contents
