Table of Contents
Advertisement
27.
Following popup window will appear on system tray to indicate successful installation.
Note: Windows might skip some of the windows, while installing the driver on USB ports.
9.2 Cannot Install the HMI USB Driver
All OIS PLUS have at least one Com port. The OIS PLUS can be programmed and monitored thru the COM 1
port using the serial cable IBM-0909-1-00. This cable can be purchased from Toshiba or made as follows:
Computer Side
connect any other wires than those shown above. Other pins are used for different purposes and
DO NOT
connecting these could interfere with the programming cable.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
OIS PLUS Side
Hide quick links:
Advertisement
Table of Contents
