Table of Contents
Advertisement
In uploading, the application and the application plus logged data uploads can be performed.
1. Application
If this option is selected, only the application will be uploaded from the unit.
Note that tag and screen names can be uploaded only if the "Download tag names" option in "Project Con-
figuration | Settings" was originally selected as shown below:
If this option was not selected, then the tag names and screen names are uploaded with default names such
as Tag1, Tag2 and T ag3. If the application used ladder logic block tasks, they cannot be uploaded. Ladder
block information would only be available from the original application file.
2. Application + Logged data
This option is selected if user wants to upload application and logger data. The application is uploaded first and
then the logger data.
The logged data is displayed in a csv format. The data can be viewed by selecting the "Display Logged
Data" menu option located under "Tools" as shown below:
The following errors may occur during uploading:
1 Device not responding
This error indicates that no communication has been established between the computer and the OIS PLUS
unit. The probabilities for this situations will be:
(i)
Unit is not connected to PC.
(ii)
Unit is not connected to selected port (Serial & USB)
(iii)
Selected port is not working
(iv)
Unit power is off.
(v)
Connecting cable (Serial &/or USB is not working)
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Hide quick links:
Advertisement
Table of Contents
