Connecting Lan Cable; Disconnecting Lan Cable - Toshiba Satellite A10 Series User Manual
Toshiba satellite a10 series portable personal computer user's manual
Hide thumbs
Also See for Satellite A10 Series:
- Maintenance manual (417 pages) ,
- Field replaceable unit documentation (11 pages) ,
- User manual (263 pages)
Table of Contents
Advertisement
User's Manual
Connecting LAN cable
CAUTION: The computer must be configured properly before connecting
to a LAN. Logging onto a LAN using the computer's default settings
could cause a malfunction in LAN operation. Check with your LAN
administrator regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-TX), be
sure to connect with a CAT5 cable. You cannot use a CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you can
connect with either a CAT5 or a CAT3.
To connect the LAN cable, follow the steps below.
1. Turn off the power to the computer and to all external devices connected to
the computer.
2. Plug one end of the cable into the LAN jack. Press gently until you hear the
latch click into place.
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.
NOTE: When the computer is exchanging data with the LAN, the LAN
Active indicator glows orange. When the computer is connected to a
LAN hub but is not exchanging data, the Link indicator glows green.
Disconnecting LAN cable
To disconnect the LAN cable, follow the steps below.
4-22
Figure 4-12 Connecting the LAN cable
Hide quick links:
Advertisement
Table of Contents
