Table of Contents
Advertisement
Connecting to an AV amplifier
C
(receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
If your AV amplifier (receiver) only has L and R audio input
jacks , use
. If your amplifier (receiver) has a digital input
C-1
jack, use
.
C-2
You can enjoy Dolby Surround effects only when playing Dolby
Surround audio or multi-channel audio (Dolby Digital) discs.
LINE 1 - TV
LINE 3/DECODER
AERIAL
IN
COAXIAL
LINE 4 IN
LINE 2 OUT
OUT
R-AUDIO-L
VIDEO
S VIDEO
R-AUDIO-L
VIDEO
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
Coaxial digital cord
C-2
(not supplied)
COAXIAL
OPTICAL
DIGITAL OUT
or
PCM/DTS/MPEG/
DOLBY DIGITAL
to DIGITAL OUT
(COAXIAL or OPTICAL)
Optical digital cord
(not supplied)
to coaxial or optical
digital input
[Speakers]
Amplifier (receiver)
with Dolby Surround
decoder
Rear (L) Rear (R)
Centre
Subwoofer
: Signal flow
Hint
z
For correct speaker location, refer to the operating instructions of the
connected components.
Note
When connecting 6 speakers, replace the monaural rear speaker with a
centre speaker, 2 rear speakers, and a subwoofer.
DVD recorder
~
AC IN
Y
C
B
S VIDEO
C
R
COMPONENT
VIDEO OUT
C-1
LINE 2 OUT
R-AUDIO-L
VIDEO
S VIDEO
to LINE 2 OUT
(R-AUDIO-L)
(red)
(white)
Stereo audio
cord (not
supplied)
(red)
(white)
to audio input
[Speakers]
Front (R)
Front (L)
Rear (mono)
Connecting to an AV amplifier
D
(receiver) with a digital input jack and
6 speakers
If your AV amplifier (receiver) has a Dolby Digital, MPEG
audio, or DTS decoder and a digital input jack, use this
connection. Note that the surround sound effects of this recorder
cannot be used with this connection.
LINE 1 - TV
LINE 3/DECODER
AERIAL
IN
COAXIAL
LINE 4 IN
LINE 2 OUT
OUT
R-AUDIO-L
VIDEO
S VIDEO
R-AUDIO-L
VIDEO
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
to DIGITAL OUT
D
(COAXIAL or OPTICAL)
COAXIAL
OPTICAL
DIGITAL OUT
PCM/DTS/MPEG/
DOLBY DIGITAL
or
Optical digital cord
(not supplied)
to optical digital input
[Speakers]
AV amplifier
(receiver) having a
decoder
Rear (L)
Rear (R)
Subwoofer
: Signal flow
Hint
z
For correct speaker location, refer to the operating instructions of the
connected components.
Note
After you have completed the connection, be sure to set "Dolby Digital"
to "Dolby Digital" and "DTS" to "On" under "Audio" in Easy Setup
(page 13). If your AV amplifier (receiver) has an MPEG audio decoder
function, set "MPEG" in "Audio" to "MPEG" (
in the separate booklet "Operating Instructions"). Otherwise, no sound
or a loud noise will come from your speakers.
Step 4: Connecting the Audio Cords
DVD recorder
~
AC IN
Y
C
S VIDEO
B
C
R
COMPONENT
VIDEO OUT
Coaxial digital cord
(not supplied)
to coxial digital input
[Speakers]
Centre
Front (R)
Front (L)
see
"AUDIO Settings"
9
Advertisement
Table of Contents
