/
Shooting with the automatic
setting
The "AUTO" mode allows you to easily shoot any subject under any
conditions because the camera makes appropriate judgments on the
situation to adjust the settings.
Select
when shooting in a location where the use of a flash is restricted.
When you turn the mode dial, the explanation of the selected mode and
methods of shooting are displayed on the screen (Help Guide disp.). You
can clear the Help Guide (page 124).
1
Set the mode dial to
(Flash Off).
2
Adjust the LCD monitor to an easily viewable angle and hold
the camera.
3
Place the desired subject within
the focus area.
• If the
(Camera shake warning)
indicator flashes, carefully shoot the
subject, holding the camera steady, or
by using a tripod.
4
When using a zoom lens, turn the
zoom ring, then decide on your
shot.
48
or
Focus area
Zoom ring
or
(Camera shake
warning) indicator