Table of Contents
Advertisement
Fig. 11
Sill
Fig. 12
Bottom
Rail Seal
Fig. 13
Mark
Fig. 14A
User Manual
4 Place Cabinet in Window Opening
1.
Open window and mark center of window sill as shown (Fig. 11).
2. Place cabinet in window with bottom sill angle fi rmly seated
over window sill as shown. Bring window down temporarily
behind top rail to hold cabinet in place (Fig. 12).
3. Shift cabinet left or right as needed to line up center of
Sill Angle
cabinet on center line marked on sill.
4. Fasten cabinet to window sill with 2 screws into holes (You
may wish to pre-drill pilot holes).
3/4" (or 1/2") Long
Hex-head Screw
5 Install Support Bracket
1.
Hold each support bracket fl ush against outside of sill, and tight
to bottom of cabinet as shown in Fig. 14A. Mark brackets at top
level of sill, and remove.
5.
Add bottom rail seal over screws to window
sill. (Fig. 13).
Page 23
Hide quick links:
Advertisement
Table of Contents
