Notes On Using The - Sony DSC-RX100M4 How To Use Manual
Hide thumbs
Also See for DSC-RX100M4:
- Instruction manual (319 pages) ,
- Service manual (100 pages) ,
- Instruction manual (45 pages)
Table of Contents
Advertisement
Help Guide
Note
If you fire the flash before the flash unit pops up entirely, it may cause malfunction.
You cannot use the flash when recording movies.
While charging the flash,
light up.
When shooting with the flash and the zoom is set to W, the shadow of the lens may
appear on the screen, depending on the shooting conditions. If this happens, shoot away
from the subject or set the zoom to T and shoot with the flash again.
When the monitor is tilted upward more than 90 degrees, it is difficult to operate the
(Flash pop-up) switch. Raise the flash unit before adjusting the monitor angle.
When using flash to shoot pictures of yourself, be careful not to look directly at the light,
because the flash will go off at a close distance. To prevent the flash from hitting the
monitor when you press it back down into the camera body after use, first return the
monitor to its original position.
[47] How to Use
Notes on using the flash
When using the flash, note the following points.
You cannot use the flash when recording movies.
While charging the flash, the
finished, the indicator lights up.
[48] How to Use
Flash Mode
You can set the flash mode.
1. MENU →
file:///Z|/15-1h_HG/Kaihan_20151021_FV-ZV/Nouhin/Web/4573718122.w/en/print.html[10/27/2015 5:43:01 PM]
flashes. After charging is completed, the flashing icon will
Using shooting functions
indicator flashes. When the charging of the flash is
Using shooting functions
(Camera Settings) → [Flash Mode] → desired setting.
Using the flash
Using the flash
Advertisement
Table of Contents
