Additional Information; General Setup Information - Sony SLV-998HF Operating Instructions Manual

Hide thumbs Also See for SLV-998HF:

Table of Contents

Additional Information

Setting the RF unit

When connecting the VCR to the TV

using only the antenna cable, you must

set the RF UNIT switch on the rear of the

VCR so that the TV can receive the

correct signal from the VCR.

Set the RF UNIT switch on the rear of the VCR to CH3 or CH4,

whichever channel is not used in your area. If both are used, set the

switch to either channel.

Press POWER to turn on the VCR.

Press TV/VIDEO to turn on the VIDEO indicator in the VCR's display

window.

Press CHANNEL +/– to display a channel number in the display

window. Select an active channel number in your area.

Turn on your TV and set it to the channel you selected in step 1

(channel 3 or 4).

The selected TV channel broadcast appears on the TV screen. If the

channels change when you press CHANNEL +/– on the VCR, you

have made the correct setting.

Whenever you use the VCR, set the TV to the channel selected in step 1.

RF UNIT

CH3

CH4

CHANNEL +/–

TV/VIDEO

Additional Information

continued

Table of Contents

Slv-998hf px